Ima Combima Double end tenoner for solid wood panels

NC controlled with grinding units

1 motorized width adjustment
max. working width: approx. 2,500 mm
Minimum working width: approx. 280 mm

low-maintenance precision roller transport chains, with 80 mm wide and 85 mm long chain plates,
Driver cams, distance 1,080 mm,pneumatic Cam control at 3 heights (6, 12.18 mm)

2 top prints, electromechanically height-adjustable,
each with a double composite V-belt 80 wide, left and right; Motorized height adjustment via axle
Working height approx. 950 mm

Electronic frequency controllers to operate the 100/200 Hz processing motors
Machine control Beckhoff fast Pentium computer
Touchscreen TFT7 display
MS Windows XP operating system
Integrated programming software IEC61131/3-SPS TwinCat
-Convenient user interface
-Logbook function for system and PLC messages
-Clear machine data table
-Individual aggregate management for each tool
-integrated pattern control

center support, pneumatically foldable, with roller track
chain conveyor extension for approx. 1,000 mm long parts,
with pneumatic workpiece lowering device
retraction device
from above, sloping, rubber-tired, driven rollers, pneumatically foldable

Equipment on the left and right side of the machine

1 milling unit
controllable, not pivotable, with a motor 6.6 kW, 400 V, 100 Hz, 6,000 rpm,
Vertical and horizontal adjustment infinitely variable via electr. axis

1 milling unit
Controllable, not pivotable, with a motor 6.6 kW - 400 V, 100 Hz, 6,000 rpm
Vertical and horizontal adjustment infinitely variable via electr. axis

Double shredder unit with:
upper and lower chipper motor each 4.4 kW, 100 Hz, 6,000 rpm,
lower chipper unit offset by approx. 200 mm to the machine infeed, horizontal and vertical adjustment stepless via electr. axis

1 profile/milling unit
controllable, pivotable, with a motor 4.4 kW, 380 V, 100 Hz, 6,000 rpm, horizontal and vertical adjustment infinitely variable via electr. Axis,
Swivel adjustment infinitely variable via electr. axis


1 profile/milling unit
controllable, pivotable, with a motor 4.4 kW, 380 V, 100 Hz, 6,000 rpm, horizontal and vertical adjustment infinitely variable via electr. Axis,
Swivel adjustment infinitely variable via electr. axis

1 milling unit
controllable, pivotable, with a motor 4.4 kW, 380 V, 100 Hz, 6,000 rpm, horizontal and vertical adjustment infinitely variable via electr. Axis,
Swivel adjustment infinitely variable via electr. axis

Milling unit 08.055
for radius milling from above and below,
with 1 upper and 1 lower motor á 660 W, 400 V, 200 Hz, 12,000 rpm approx. 25 degrees swivelling
pneumatically on, - disengageable

blow-off nozzle
for cleaning the top of the workpiece

Milling unit 08.055
for radius milling from above and below,
with 1 upper and 1 lower motor á 660 W, 400 V, 200 Hz, 12,000 rpm approx. 25 degrees swivelling
pneumatically on, - disengageable

Milling unit 08.055
for radius milling from above and below,
with 1 upper and 1 lower motor 660 W, 400 V, 200 Hz, 12,000 rpm approx. 25 degrees pivotable
pneumatically on, - disengageable

Edge sanding unit 08.062
for grinding vertical workpiece edges,
overall oscillating, max. workpiece height approx. 80 mm

Profile sanding unit 08.063
below for grinding small profiles,
e.g. radii up to max.: approx. 7 mm,
Motor 0.55 KW, 50 Hz, 1,500 rpm

Profile sanding unit 08.063
mounted on the upper pressure
below for grinding small profiles,
e.g. radii up to max.: approx. 7 mm,
Motor 0.55 KW, 50 Hz, 1,500 rpm

Profile sanding unit Heesemann type M4
horizontal and vertical adjustment infinitely variable via electr. Axis, swivel adjustment continuously via electr. Axis about 45 degrees up and down
Motor 1.1/1.8 KW, 50 Hz, 1,500/3,000 rpm

Profile sanding unit Heesemann type M4
horizontal and vertical adjustment infinitely variable via electr. Axis, swivel adjustment continuously via electr. Axis about 45 degrees up and down
Motor 1.1/1.8 KW, 50 Hz, 1,500/3,000 rpm

Profile sanding unit Heesemann type M4
horizontal and vertical adjustment infinitely variable via electr. Axis, swivel adjustment continuously via electr. Axis about 45 degrees up and down
Motor 1.1/1.8 KW, 50 Hz, 1,500/3,000 rpm

Suction sluice with blow nozzle
Extension device approx. 700 mm long