Ima BIMA 310/V 120/600 3

Dimensions 1310 x 5000 x 65 mm

Machine in CE-execution
Working area in the X direction without edge banding 6000 mm
Working area in the X direction with edge banding 5000 mm
Working area in the Y direction 1200 mm
Working area in the Y direction
with main spindle and tool diameter 20 mm 1310 mm

Max. working height from upper edge suction plate Z1 100 mm
Z2 depending on equipment / application
Alternating field area:
without pendulum machining, without edge banding X= 2 x 2900 mm
available central space X= 200 mm
without pendulum machining, with edge banding X= 2 x 2150 mm
available central space X= 700 mm
with pendulum machining, without edge banding X= 2 x 2400 mm
available central space X= 1200 mm
without pendulum machining, with edge banding X= 2 x 1700 mm
available central space X= 1600 mm

Feed drive:
Track speed max. 20 m / min.
Rapid traverse in X-axis 100 m / min.
Rapid traverse the Z-axis 25 m / min
Acceleration 5 m / sec

CNC IMATRONIC NT 231
Chip conveyor belt
Vacuum pump 100 m³ / h

Table equipment:
8 adjustable work piece supports (brackets) in X, with each one rear and one central stop
2 fixed stop right and left in X direction
2 folding stops at left table side at fixed position
6 sets suction plates, consisting of 6 x 114 x 159 x 100 mm and 6 x 125 x 75 x 100 mm

Main spindle milling motor 12 kW in S-1 operation, with HSK 63 reception, from 1,500 to 24,000 rpm
Machine with C-axis
18-station tool changer, the support moving in X-direction

1 vertical boring unit S21, 4 kW,
21 spindles (x-11 + y-10), 6.000 - 9.000 rpm, spindles individually controlled

Gluing unit VT 50 with glue application to the edge material
Edge thickness from 0.4 to 3 mm
Edge height 14 - 64 mm
Support in Y-direction for coupling to main support
4-sided edge banding and round edge banding on butt joint
Single roller magazine, horizontal, with strip feed and reinforced cutting knife

Adapter aggregates:
- Saw, 90 degree fixed
- Horizontal boring and milling head (4 spindels)
- Adapter unit for flush trimming or chamfer milling
- Profile scraper
- Enlargement: for the profile scraper or flush trimming to be used as combined unit, self tracing
flat scraper with two air nozzles for cleaning

Other equipment features:
- LED setup aid for position of vacuum cup units
- Chip transport belt

IMAWOP
Safety equipment: 3 electric mats, fences and door
400 V, 50 Hz