IDM ACTIVA HD

SINGLE SIDE SINGLE SIDE AUTOMATIC EDGE BANDING MACHINE

ROLL MATERIAL FOR STRAIGHT EDGES MM 0.4-3
EDGESTRIPS THICKNESS MM 0.4-10
PANEL THCKNESS MM 10-60
VARIABLE FEED SPEED 10-25 MT/MIN
VOLTAGE: 400V/50HZ with Neutral EU
(Total Machine length mm 8500)

Description:
- Single sided edgebander with LH infeed fence
- Bottom feed track riding on Round/flat guides
- Top pressure beam with single drive and clutchguided by spring loaded rods to guarantee perfect feed of panels through the working Units.
- Automatic lifting of Top pressure beam
- Top working units connected to top pressure beam for simultaneous height adjustment
- The electric control cabinet is located at front of machine

TECHNICAL DATA :
Variable feed speed: m/min 10-25
Panel overhang from the track : fixed
Standard straight processing mm 30
With corner rounding C1+C2 and scraper RCS mm 35

Panel dimensions:
Thickness mm 10-60
Min. panel Width
- Standard straight panel mm 90
- With corner rounding and Radius scraper mm 95

EXECUTION ACCORDING TO CE RULES
In accordance with Ce rules, 89/392 machines directive.

SOUNDPROOF CABINET LH-INFEED SIDE FENCE - 2 POSITIONS FROM PLC
- with double pneumatic stop 0.4-3mm

SPRAY ANTI-ADHESIVE UNIT 'AAR'
To avoid deposits of glue on the top and bottom surface of the panel.
Complete with 2 spray-guns fed by two anti-adhesive liquid containers.

PRE-MILLING UNIT KW 4 (5 hp)

Technical data:
Speed rpm 9000
Motor power kW 4+4
Max. section removal according
to the track speed mm² 90
Panel thickness mm 10-45
Tools D=100 H=49 Z=3+3

AIR BLOWERS FOR CLEANING OF PANELS GLUING UNIT FOR STRAIGHT PROCESSING
For the gluing of straight edges in coils and in strips with hot melted glue applied to panel edgel:
- quick melt system
- Quick interchangeable glue pot
- control of the glue temperature on glue pot and on premelt system
- Edge presence control
- exhaust hood for fumes
- Guillotine shears for tape cut (max 3mm thick X 45)
- automatic system of edges loading for material in coils and strips which allows to change the types of applied edges in a short time
- pressure zone with pneumatic independent adjustment of the pressure with Siko mechanical readout.

Technical data:
Edge thickness mm 0,4-10
Edge height mm 12-65
Min. coil length mm 230
Min. strips length mm 230
Min. length of solid wood mm 230
Cutting section max.
- plastic edge mm2 135 (mm 3x45)
- wood edge mm2 96 (mm 3x32)
Strip storage capacity with single or double coil magazine mm 200
Glue pot capacity kg 1,2
Glue melting capacity with pre-melting system kg/h 8

COIL MAGAZINE (MAX. H=65)
Feeding edges system with single station for automatic infeed for material in coil combines with pre-cut strips feeding table:
- Roll diameter mm 800
- warning indicating the end of the roll.

Technical data:
Maximum roll Ø mm 800
Max. edge thickness mm 3
Max. edge height:
For thin edges up to 1 mm mm 65
For edges up to 3 mm mm 45
Distance between panels: 18 / 25 m/min mm 350 / 380

END CUTTING UNIT YU/1000 - KW 0,35
For the removal of the exceeding edge from the top and bottom of the panel:
- unit installed on the pressure beam
- two motors with pneumatic stroke
- front, back feeler with automatic intervention
- lateral feelers on linear ball recirculating guides with pneumatic intervention
- motors with manual inclination up to 15°
- automatic cut-off.

Technical data:
Speed rpm 12000
Max. track speed (depending on edge thickness) m/min 20
Motors power kW 0,35+0,35
Edge thickness mm 0,4-25
Max. edge section mm² 1100
Min. panel length mm 145
Distance between panels mm 600
Blade stroke mm 40
Tools installed nr.2 blades Ø 150 mm

TOP & BOTTOM ROUGH TRIMMING UNIT R KW 1.8 (2.5 hp)
For the rough trimming of thin and medium edges or for the finishing of the solid wood edge:
- two overlapped motors provided with quick-release device
- top motor connected to the pressure beam for the automatic adjustment according to the thickness panel
- disk-shaped big diameter vertical feelers
- numerical indicators for horizontal/vertical adjustment of motors
- automatic on/off.

Technical data:
Motors power kW 1+1 – Rpm 12,000
Edge thickness mm 0,3-12
Tools installed of Widia with cutters to throw 80x20

TOP & BOTTOM FINE/RADIUS TRIMMING UNIT RSU KW 0,5
For the finishing of thin edges or wood or for the rough trimming of the radius on PVC/ABS edges:
- two motors inclinable up to 30° with quick-release system
- top motor connected to the pressure beam for the automatic adjustment according to the edge thickness
- disk-shaped vertical feelers of big diameter
- Double pneumatic stop for motors and side tracers or tape or thick ABS .
- lateral disk feelers with independent horizontal adjustment
- numerical decimal indicators for the horizontal shifting of motors and feelers
- horizontal and vertical automatic cut-off of 10 mm.

Technical data:
Motors power kw 0,5+0,5 - Rpm 12,000
Edge thickness mm 0,3-5
Min. Panel thickness
with cutters R=3 mm 13
Tools not installed

CORNER ROUNDING UNIT C1+C2 WITH DOUBLE STOP FROM N.C.
To carry out the front and back rounding on the transversal side
of shaped panels or on PVC/ABS edges and thin solid wood
with a very high degree of finishing:
- four motors provided with quick-release motor
- copying system with bearing feelers and lateral feeler;
- Double pneumatic stop for tape or thick PVC/ABS .
- automatic on/off.

Technical data:
Motors Power kW 0,35x4 Rpm 12,000
Max. speed track feed m/min 22
Edge thickness mm 0,3-5
Min. concave profile radius mm 35
Minimum distance of panel:
18 m/min mm 460
22 m/min mm 470
Min. panel length:
18 m/min mm 170
22 m/min mm 220

UNIVERSAL GROOVING/MILLING UNIT ‘’U’’ – 5.5 HP
Univeral grooving unit for profiling/grooving on top/bottom or side of panel ,
For stop or continuos grooves

Equipped with :
- Side tracer .
- Bottom dust hood .
- Tilt device to slat motor 90° on top/side or bottom of panel .
- Spindle rotation LH/RH by selector located on control panel
- Siko readouts for positioning of the unit .
- Air blowers to clean panel.
- Automatic ON/OFF
-Pneumatic jump IN/OUT in both horizontal or vertical position

TECHNICAL DATA:
- Motor HP 5,5 – 12000 rpm
- Max removal section : mm² 120
- Shaft mm 30x55
- Keyzay mm 8
- Toll diam max mm 125
- 1 x Dust hood outlet diam. mm 120

WITHOUT TOOLS GLUE SCRAPER UNIT RCA/2C
It eliminates possible excess of glue on the top and bottom side of the panel:
- completed with two cutter-tools of Widia;
- vertical feelers;
- two blowers which allows the cutters to be always clean;
- pneumatic intervention to assure the best processing of the starting and the ending side of the panel;
- automatic cut-off.

RADIUS SCRAPER UNIT RCS
For the finishing of radiararized PVC/ABS edges:
- quick-release device made of a tool-holder block + tool which allows the fast and precise interchangeability of the tool;
- vertical and horizontal shifting devices made of steel groundedbars with recirculating ball bearings;
- vertical and horizontal feelers of big diameter;
- suitable cleaning and nebulization blowers for each tool;
- suction of the cuts-off with suitable box for chip;
- numerical indicators for the horizontal shifting;
- automatic cut-off.

TILTABLE OSCILLATE BRUSHING UNIT SP/F
Technical data:
Panel thickness mm 15-60
Edge thickness mm 1-5
Tools not installed
For the cleaning and finishing (shining) of plastic edges:
- two overlapped motors manually inclinable completed with two cloth brushes;
- top motor connected to the pressure beam for the automatic adjustment according to the thickness panel;
- manual cut-off.

Technical data:
Motors power kW 0,29+0,29 – Rpm 1500
Max. inclination 30°
Brushes dimension mm 150x50x33

TOP & BOTTOM EDGE BRIGHTENING UNIT PH/1600
For brightening up the colours on ABS edges.
The unit receives air from the compressed air distribution system and gives out hot air through two independent nozzles.

Technical data:
Power W 1600+1600
Tension V 220EDGE BANDER