Hyundai-Kia KH80G 4 Axis

31.5″ Plt Hyundai Kia KH80G
New – December 2007

Table Capacity:
– Size…………31.5″ x 31.5″
– Load Capacity – Maximum…………4,850 Lbs
– Workpiece Capacity – Maximum (Diameter x Height)…………Ø45.3″ x 45.3″H
Travels:
– X Axis…………49.2″
– Y Axis…………39.4″
– Z Axis…………33.4″
– Spindle Center to Table Top Distance…………1.97″ – 41.3″
– Spindle Nose to Table Center Distance…………9.8″ – 43.3″
Spindle:
– Taper…………NT#50
– Power (30 min. rating/Continous)…………34.7 HP / 29.3 HP
– Speed…………4,500 rpm
– Torque – Maximum…………1,100 ft-lbs
– Bearing Inside Diameter…………3.9″
– Cooling System…………Oil
Feedrates:
– Rapid Traverse Rate (X/Y/Z Axes)…………709 ipm
– Cutting Feedrate – Maximum…………315 ipm
– Ball Screw Diameter & Pitch…………Ø1.97″ & 0.39″
– Servo Motors (X/Y/Z Axes)…………8 HP
ATC:
– Tool Type…………NT #50/CAT 50
– Number of Tools…………80
– Tool Diameter – Maximum…………Ø 5.1″ (Ø 10.2″ without adjacent tool)
– Tool Length – Maximum…………19.7″
– Tool Weight- Maximum…………59.5 Lbs
– Tool Change Time…………3.5 sec. Tool to Tool (9.5 sec. Chip to Chip)
– Eccentric Load on the Magazine – Maximum…………264 Lbs
– Magazine Rotating Rate…………670 ipm
Automatic Pallet Changer & Index Table:
– Number of Pallets…………2
– Pallet Size…………31.5″ x 31.5″
– Change Time…………28 seconds
– A.P.C. Mechanism…………Shuttle Type
– Pallet Load Capacity – Maximum…………4,850 Lbs
– Height (from Ground to Pallet Top)…………39.8″
– Table Indexing Increment…………1 Degree
– Tabe Index Time…………7 sec./90°
Accuracy:
– Axis Positioning…………+/- 0.0002″
– Axis Repetability…………0.00008″
– Spindle Run-Out (at 11.81″)…………0.0004″
– Table Index…………+/- 2 arc sec
– Pallet Change…………+/- 0.00012″
CNC Controller…………Fanuc 18iMB
Through Spindle Coolant System:
– Pump Motor…………2 HP
– Discharge Rate…………5.3 gal/min.
– Pressure (Pump)…………435 psi
– Filter…………Line Filter (50 µm)
– Command Method…………M-code, Manual Switch
Flood Coolant:
– Pump Motor…………0.5 HP
– Discharge Rate…………7.9 gal/min.
– Pressure (Pump)…………7.1 psi
Hydraulic System:
– Tank Capacity…………26 gal
– Pump Motor…………7.3 HP
– Capacity Flow…………15.9 gpm, 996 psi

EQUIPPED WITH:
Fanuc 18iMB CNC Control
(2) Tombstones
Through Spindle Coolant
Rigid Tapping
Coolant System
Lubrication System
Chip Conveyor