Hwacheon Fanuc 0i-TF 5,000 rpm Hi-Tech 350A YSMC 2 Axis

HWACHEON Hi-Tech 350A YSMC
Year 2015

NC Controller Fanuc 0i-TF
Swing over bed 27.56 in
Swing Over Saddle 21.65 in
Max. cutting diameter 16.54 in
Standard Cutting Diameter 10 in
Chuck-Size 8 in [Sub: 8 in]
Type of Spindle Nose ASA A26 [Sub:A2-6]
Max. Spindle Speed 5,000 rpm [Sub: 4,000]
Through Spindle Hole Diameter ø2.95 in [ø2.44 in]
Max. Bar size ø2.56 in [ø2.01 in]
Spindle Motor (30min/cont) 25/20 [10/7.5] HP
Turret: Number of tool station 12 ea.
Axis: Rapid Speed (X/ Z / Y / B) 787 / 945 / 394 / 630 ipm
Axis: Max. Stroke (X / Z / Y / B) 280 (YSCM: 260) / 790 / 120 / 726 in
Axis: Feed Motor (X / Z / Y / B) 5.5 / 5.5 / 5.5 / 2.2 HP
Tailstock Travel 25.59 in
Tailstock: Quill Diameter ø3.94 in
Tailstock: Taper Hole # 5 MT
Tailstock: Quill Stroke 4.72 in
Turn mill: Rotary tool Spindle Motor 2.2 HP
Turn mill: Max. Rotary tool Speed 5,000 rpm
Spindle power 20 HP
Spindle speed 5000 rpm
Spindle torque 164.9 / 133.8 Nm
Rapid speed 20 / 10 / 24 m/min
Tool shank BMT-65 / BH
Max. cutting length 26.5 in
Sub spindle speed 4000 rpm
Sub spindle motor power 10 HP
Spindle center Height: 45.67 in
Coolant Tank Capacity 50.19 gal.
Power Source: Electrical Power Supply YMC: 50, YSMC: 55
Conveyor Dimensions (LxWxH) 162 in x 19 in x 80 in
Machine Dimensions (LxWxH) 138 in x 81 in x 87 in
Machine weight (14,110 lbs.)

Equipped With
Sub Spindle, Y Axis, Tool Pre-setter, 1000 PSI High Pressure Coolant
Probing, 2.5" Bar Capacity, 8" Chuck, Chip Conveyor, Run Time: 1414