Homag Moldteq M-300

Four-sided planer in window version with electronic axial and radial adjustment of the spindles.

Advantages:
- Flexibility thanks to variable feed and adjustable spindle speed
- Intuitive machine operation via powerTouch2
- Quick setup using proLock spindle clamping
- High precision thanks to solid cast iron stand
- Ideal power transmission as each spindle has its own motor is driven

Technical data short version:
Number of spindles: 6
Working width: 250 mm
Working height: 160 mm
Dressing table length: 2500 mm
Spindle speed: continuously adjustable 4,000 - 8,000 rpm
Feed speed: up to 24 m/min
WINDOW PACKAGE
Machine without processing tools

Detailed description from the manufacturer
Complete description see attached PDF):
Planing and profiling machine with 6 work spindles.

Working width min. 10 mm
Working width max. 250 mm

Working height min. 10 mm
Working height max. 160 mm

STEERING:
powerControl with powerTouch MOLDTEQ M-300
Modern control system based on Windows PC

Feed table 2,500 mm
Automatic lubricant pump
Lubrication impulses are generated in powerTouch using the
Running meters set.

Width-controlled guide ruler LPP306
The ruler is with the left spindle
coupled, the adjustment is pneumatic
supported and after reaching the target
Position pneumatically clamped.
Ruler does not need to be adjusted separately by hand

FEED:
Feed speed min. 6 m/min, max. 24 m/min
Feed motor power 4 kW
Positioning the feed carrier
Positioning is done via powerTouch.

SPINDLES IN GENERAL:
Tool clamping system
ProLock quick-clamping system on all tool spindles
Fast and convenient tool change

Quadruple spindle bearings
Two pairs of ground bearings in each area
the pulley and the spindle flange
Long service life and consistent concentricity precision

FIRST LOWER SPINDLE:
Spindle motor power 7.5 kW
Siemens IE3 energy saving motor
Power: 7.5 kW
Speed range: 6,000 rpm
Spindle diameter 40 mm
Spindle length 281 mm
The system cannot be operated without a joint milling cutter (tool).

FIRST RIGHT SPINDLE:
Spindle motor power 7.5 kW, adjustable
Siemens IE3 energy saving motor
Spindle speed infinitely adjustable
Power 7.5 kW
Speed range 4,000 rpm to 8,000 rpm
Spindle diameter 40 mm
Spindle length 176 mm
Motorized positioning radially
Motorized axial positioning

FIRST LEFT SPINDLE:
Spindle motor power 7.5 kW, adjustable
Siemens IE3 energy saving motor
Spindle speed infinitely adjustable
Power 7.5 kW
Speed range 4,000 rpm to 8,000 rpm
Spindle diameter 40 mm
Spindle length 176 mm
Motorized positioning radially
Motorized axial positioning

FIRST UPPER SPINDLE:
Spindle speed infinitely adjustable
Power 7.5 kW
Speed range 4,000 rpm to 8,000 rpm
Spindle diameter 40 mm
Spindle length 266 mm
Motorized positioning radially
Motorized axial positioning

SECOND UPPER SPINDLE:
Spindle speed infinitely adjustable
Power 7.5 kW
Speed range 4,000 rpm to 8,000 rpm
Spindle diameter 40 mm
Spindle length 266 mm
Motorized positioning radially
Motorized axial positioning

Glazing bead removal
When the function is selected, the pressure shoe cycles (in the direction of travel) to the left and brings
at the same time the riving knife and the kickback protection in position
- Can also be done with a glazing bead saw attached
Workpieces up to a minimum height of 10 mm are produced become
- No manual adjustment required
- There is only one way to cut out the glazing bead an axial position of the glazing bead saw

SECOND LOWER SPINDLE:
Spindle speed infinitely adjustable
Power 7.5 kW
Speed range 4,000 rpm to 8,000 rpm
Spindle diameter 40 mm
Spindle length 266 mm
Electronic double display radial
TARGET values are specified by powerTouch,
ACTUAL values are set manually using a hand crank.
Motorized axial positioning