Homag KAL211 EDITION 2264

edge banding machines
Description:
Equipment overview:
- Separating agent spray unit above & below
- Joining milling unit 2 x 4 kW
- Gluing unit with workpiece preheating, 2 rollers, pressure zone C and QA34 application unit for PU with quick-release system
- auto. Pressure zone adjustment
- Preparation for Lasertec activation unit
- Snipping unit Hl84 0.8 KW
- pneumatic Adjustment of pre-milling unit
- Pre-milling unit Bf10 1.5 kW
- Form milling unit Fk11 manual
- Automatic adjustment from chamfer to radius milling
- Rolling side key FK
- Pneumatic adjustment FA11 for moving away from the working area to the side
- Multi scraper MN 21 autom. for a maximum of 5 different profiles.
- Finishing unit (glue joint scraper and buffing wheel)
- Detergent spray unit top & bottom
- powerControl PC22

Workpiece and edge parameters: - Workpiece width without edge min:
- With a workpiece thickness of 12-22 mm ¦ 60 mm*
- With a workpiece thickness of 23-40 mm ¦ 105 mm* *Depending on the workpiece length
- Workpiece overhang ¦ 30 mm
- Workpiece thickness ¦ 8 - 60 mm
- Edge material roll ¦ 0.3 - 3 mm
- Edge cross-section max: ¦
- For PVC ¦ 135 mm²
- For veneer ¦ 100 mm²
- Roll diameter max. ¦ 830 mm
- Edge material strips ¦ 0.4 - 20 mm
- Edge cross-section max: ¦
- For strips ¦ 900 mm²
- If no radius is specified, R=2 mm and a 20° bevel will be retracted and delivered
- The machine operator is responsible for the use of suitable materials (boards, adhesives, edges, cleaning agents, paints, etc.).