Homag KAL210 Ambition 2264

Edge banding machines
Description:
Overview of the equipment:
- Workpiece support scissor design with roller support, extendable to 1000 mm
- Inlet ruler automatically adjustable
- Fixed stop side on the left
- Inlet lock pneumatically controlled
- Upper pressure via driven composite V-belt
- Electric height adjustment
- Workpiece transport device via transport chain with rubber pad
- Release agent spray unit top/bottom
- Joining milling unit 2 x 3 kW
- Gluing part A20 With 2 rollers, consisting of workpiece preheating, Quickmelt application unit with quick-clamping system, 2-roll magazine, pressure zone C (automatically adjustable, with 1 pre-press roller and 6 post-press rollers)
- Trimming unit HL84 0.8 kW, with automatic. Chamfer/straight adjustment as well as pneum. Adjustment of flush/overhang caps
- Pre-milling unit 1.5 kW, pneum. Adjustment of bundle/overhang milling
- Form milling unit FK11 with automatic. Adjustment from chamfer to radius milling
- Profile scraper PN10 (with pneumatic adjustment for lateral movement)
- Finishing unit (with pneumatic adjustment for lateral movement), consisting of glue joint scraper and buffing unit
- PowerControl PC22 control
- Remote control
- Workpiece guide for FK device

Technical data:
- Feed ¦ 18 - 25 m/min
- Feed max. with FK11 ¦ 20 m/min
- Working height ¦ 950 mm
- Pneumatic connection ¦ 7-8 bar
- Total length ¦ 7755 mm
- Workpiece width min:
- For workpiece thickness 12-22 mm ¦ 60 mm*
- For workpiece thickness 23-40 mm ¦ 105 mm*
*Depending on the workpiece length
- Workpiece projection ¦ 30 mm
- Workpiece thickness ¦ 12 - 40 mm
- Workpiece thickness from 8 mm (only longitudinal processing without corner copying/rofil scraper/without top layer projection)
- Workpiece thickness up to 60 mm with feed max 20m/min feed
- Edge material roll ¦ 0.3 - 3 mm
- Edge cross section max: ¦
- For PVC ¦ 135 mm²
- For veneer ¦ 100 mm²
- Roll diameter max. ¦ 830 mm
- Edge material strips ¦ 0.4 - 20 mm
- Edge cross section max: ¦
- For strips ¦ 900 mm²