Holz-Her Dynestic 7532 10.5 automatic with Storemaster surface

Basic machine - Dynestic 7532-10.5 Automatic
Dynestic table
For classic nesting processing with wear plate
Processing length 3100 mm
Machine frame in welded construction
with ground and hardened prism guides for the traveling column, aggregate head and consoles
Traveling column in gantry design
Rack and pinion drive, helical gears, in X and Y directions,
Ball screw spindles in Z direction for precise positioning

Technical data:
Processing dimensions:
Max. support surface on nesting table:
X = 8100 mm Y = 1560 mm
Max. travel distances
X = 4695 mm
Y = 2100 mm
Z = 293 mm
Max. overrun height DYNESTIC table
Z = 120 mm
from top edge of table (without wear plate)
Maximum programmable Speed
Vector speed: 128.0 m/min
X = 80 m/min, Y = 100 m/min, Z = 25 m/min

DYNESTIC table
Fixed, continuous machining table with grid division,
continuous grooves in X and Y direction, spacing of the grooves 50 mm
with 25 meters of sealing cord for clamping the wear plate

Vacuum field
1-circuit vacuum system
Drilling unit 7877, 19 spindles
Drive power 1.7 kW
13 vertical spindles can be called up individually
U-shaped arrangement
5+4 in X and 4 in Y direction
32 mm grid
Max. drill diameter: 35 mm
Total drill length: 70 mm from screw end (depending on plate thickness)
Spindle extension stroke: 70 mm
Direction of rotation: clockwise / anti-clockwise rotation alternating n(max.) 1000 - 4400 min-1 continuously adjustable
Mounting: M 10 thread - 11 mm fit
Without tool, without mount
6 horizontal spindles
2 double drilling spindles in X direction
1 double drilling spindle in Y direction
Mounting: M 10 thread, 11 mm fit
Total drill length max. 63 mm from screw end
Without tool, without mount
Milling unit 7842,
Power: 12.0 kW (S6)
n(max.) = 1000 - 24000 min-1 continuously adjustable,
Max. power at 12000 min-1 to 24000 min-1
Air-cooled
With HSK-F 63 tool holder
With right-hand threaded nut (for right-hand rotating tools)
With collet chuck with HSK shaft
Ceramic ball bearing (hybrid bearing)
Tool weight max. 6 kg (incl. holder)
Tools: milling and grinding tools max. Ø 160 mm
Safety paneling in accordance with CE standard
Safety fence on the side and rear
Vacuum pump 500 m³/h dry runner
Personal safety through light barriers
in the front area of ​​the machine
Handheld control unit for remote control of the machine with the following operating functions:
> Start / stop of the machining program
> Speed ​​control of the machining cycles
> Reset button
> Manual feed / rapid traverse for all axes
> EMERGENCY STOP
CAMPUS V7 CAD/CAM software 1x machine license

Consisting of:
1. CAMPUS NC-HOPS
2. CAMPUS MT-Manager
3. CAMPUS Workcenter
4. CAMPUS DXF interface
CAMPUS NC-HOPS
Graphical variant system with WOP and CAD/CAM properties for creating part variants with macro technology
Automatic central lubrication
Automatic lubrication according to defined lubrication intervals
Additional Sealing against dust by overpressure in each guide carriage
Simultaneous lubrication
for all linear guides in X, Y and Z directions,
for all ball screw spindles in Y and Z directions
for all milling spindle guides,
for tool changer guides (except pick-up tool changer)
All console guides are not lubricated
Tool changer 7875, 14-way linear pick-up with tool cover
Maximum tool weight:
> 5 kg per tool or 60 kg when fully loaded
Can be equipped with collet chuck with HSK shaft
(no tools visible in the photos)
Stop monitoring
Safety device to prevent damage to the stops
Automation
Loading table with 4 roller conveyors
For manual or automatic loading of sheet material
Also as a preparation table for attaching barcode labels for DYNESTIC 7532
Feed device on the mobile column
With 4 vacuum suction cups for picking up the plate material and automatic transport to the processing table
Slider on the mobile column, controlled
Including simultaneous suction of the wear plate during pushing off with 1 suction nozzle Ø 250 mm
including underfloor suction, suction shaft at the end of the removal table with 2 suction nozzles Ø 80 mm

Complete conveyor belt
Belt conveyor for transporting the workpieces from the support point of the external feed to the transfer point of the machine
10" ruler can be lifted pneumatically (AUT 12) on the front edge of the machine table; ideal for safely pushing off even smaller workpieces
Removal table, with conveyor belt
Including light barrier and underfloor suction