Holz-Her Auriga 1308

Used machine
Condition: very well maintained/refurbished in a workshop
With manual pressure bridge adjustment
With central lubrication of the chain guide rail manually via grease nipple

- Edge thickness for rolls 0.4 - 3 mm (depending on material)
- Edge thickness for strips 0.4 - 8 mm (depending on material)
Edge cross-section max. 6 x 42 mm
Edge height max. 65 mm
Workpiece thickness 6 - 60 mm
Workpiece width min. 160 mm (without corner rounding 1832)
Feed speed 10 m/min.

- Edge thickness max. 6 mm
- PLC control (program-controlled)
- Glue height max. 60 mm
- Pre-milling unit 1801 in up- and down-feed (with diamond tools)

Automatic edge feed 1903 Transport of rolls and strips
Maximum load capacity 40 mm
Rolls; Max. edge thickness 3 mm (depending on material)
- Adhesive application station cartridge 1906 M
Automatic glue height adjustment (tactile nozzle)
Processing of EVA and PUR adhesives
Adhesive in cartridges or granules
Processing of neutral or colored adhesives
Adhesive application using nozzle technology
Heat-up time 3 min.
Incl. automatic reloading
Incl. manual flushing function via separate flushing channel
Magazine capacity: 1 cartridge including pressure regulator for regulating the cartridge contact pressure
Automatic adhesive temperature reduction over time
- 1912-3 pneumatic pressure unit
First roller driven with pneumatic plunge control
2 conical pressure rollers
- 1918 trimming unit (60 mm) pneumatically pivotable to 10°
- 1827 MOT4 multi-function milling unit for milling the upper and lower longitudinal edges
with motorized positioning of the horizontal guides Tracer shoes
with motorized axial positioning of the milling motors
including pneumatic adjustment (separate top and bottom) for flush radius milling
including blow nozzles
Flush milling
3 mm radius
Chamfer tilting 0-15°, manually (for max. edge thickness 6 mm)

Pneumatic tilting device for milling unit 1827 MOT 4
Pneumatic tilting to a 15° chamfer from the control unit
- Vertical tracing pneumatically adjustable by 0.1 mm for milling with edge overhang, e.g.,for plastic edges
- Corner rounding unit 1832
Corner rounding function for up to 3 mm edge thickness
Tool thickness 12-60 mm
including automatic lifting device
(max. Feed speed 10 m/min.)

- Radius scraper with motorized adjustment (MOT 2)
incl. pneumatic adjustment (separate top and bottom)

Chip catcher
- Flat scraper 1964
for removing adhesive residue for a clean bond joint
top and bottom application-controlled

with spray device 1856 at the inlet (release agent) and outlet (cleaning agent)
with extendable workpiece support
Total length 4630 mm