Holz-Her Auriga 1308

Used machine
Condition: very well maintained/workshop overhauled
with manual pressure bridge adjustment
with central lubrication of the chain guide rail manually via grease nipple

- Edge thickness of rolled goods 0.4 - 3 mm (depending on material)
- Edge thickness of strip goods 0.4 - 8 mm (depending on material)
Edge cross section max. 6 x 42 mm
Edge height max. 65 mm
Workpiece thickness 6 - 60 mm
Workpiece width min. 160 mm (without corner copying 1832)
Feed speed 10 m/min.

- Edge thickness max. 6mm
- PLC control (program controlled)
- Glue height max. 60 mm
- Jointing milling unit 1801 in synchronous and counter-rotating mode (with diamond tools)

Edge feed 1903 automatic.
Transport of rolls and strips max. loading capacity 40 mm rolls; max. edge thickness 3 mm (depending on material)
- Glue application station cartridge 1906 M automatic glue height adjustment (tactile nozzle)
Processing of EVA and PUR glues
Glue in cartridges or granulate form
Processing of neutral or colored glues
Glue application using nozzle technology
Heating time 3 min.
Incl. automatic reloading
Incl. manual rinsing function via separate rinsing channel
Magazine capacity: 1 cartridge incl. pressure regulator for regulating the cartridge contact pressure
Automatic glue temperature reduction after time - Printing unit 1912-3 pneumatic
First roller driven with pneumatic immersion control 2 conical re-pressure rollers
- Trimming unit 1918 (60 mm) pneumatically pivotable to 10°
- Multifunctional milling unit 1827 MOT4
for milling the upper and lower longitudinal edges
with motorized positioning of the horizontal Sensor shoes
with motorized positioning of the milling motors in the axial direction
including pneumatic adjustment (separate at top and bottom) for flush radius milling
including blow nozzles
Flush milling
Radius 3 mm
Swivel chamfer 0-15°, manually (with max. edge thickness 6 mm)

Pneumatic swivel device for milling unit 1827 MOT 4
Pneumatic swivel to chamfer 15 ° from the control
- Vertical tracing pneumatically adjustable by 0.1 mm for milling with edge overhang e.g. for plastic edges
- Corner copying unit 1832
Corner copying function up to 3 mm edge thickness
Tool thickness 12-60 mm including automatic lifting device (max. feed speed 10 m/min.)
- Radius scraper with motorized adjustment (MOT 2)
including pneumatic adjustment (separate top and bottom)

Chip catcher box
- Surface scraper 1964 for removing the adhesive residue for a clean adhesive joint top and bottom application-controlled with extendable workpiece support