Hem TWISTER Horizontal/Single Column/Miter Arm Heavy Duty Production Bandsaw Saw

HEMSAW TWISTER

Capacity 14" High x 20" Flat @90°, 14" High x 15" Flat @ 45°, 14" High x 10" Flat @ 60° (Miter one direction only)
Arm Miter Remove locking pin and arm is manually moved to desired degree of cut - locking pin is re-inserted in hole and arm is manually locked in place. Each hole is spaced 15° apart. Degrees are read on a protractor.
Arm Lift Powered from control console.
Wheel Size 18” diameter wheels.
Blade Size 1-1/4” x 15’ 0” x .042” thick
Blade Drive 5 HP., 220/440V ac, 3 Phase, 1,800 RPM, Ball Bearing TFC.
Blade Speed Infinitely variable speed drive 60-300 SFPM
Air Requirements 85 PSI, 3-5 CFM, Equipped w/air filter/lubricator

Operator Control Control console is located in front of saw for operator convenience. Saw may be operated in manual mode. Motor will shut off at the end of cut and the arm stays in the down position.
Motor Start Interlock Control is equipped with a safety feature of motor start interlock.
Clamping Vise Main clamping vise is powered and is non-cocking
Cutting Pressure Adjustable cutting pressure 0-800 lbs.
D Rate Adjustable 0”-3”/second
Clamping Pressure Adjustable 0-1,000 Lbs.
Blade Guide System Side and back guides are flat carbide inserts.
Coolant System Machine is set-up for flood style coolant system with 17 gallon capacity.
Safety Guards Machine is equipped with blade guards and awareness barriers for safety purposes.
Load Table 24” roller load table is part of machine base and is fully coolant panned.
Discharge Table 24” solid plate discharge table is part of machine base and is fully coolant panned.
Weight 3000 pounds