Heller 1707 MK5

Running Hours: 3,700

Item 1: Model 1707MK5
100% Forced Convection Reflow Oven with the following features and benefits:
22″ Wide Mesh Belt Conveyor to accommodate PCB’s up to 22″ wide
18” On Load Conveyor and 18” Off Load Conveyor
73″ Heated Tunnel Length • 1 Internal Cooling Module with 15” of Cooling
14 Independent Temperature Controlled 350C Semi-Circular Balanced Flow
“Lead Free”

Heating Zones
Spike Zone Design for minimal liquidus time
Complete Computer Control System including:
Flat Panel Color Monitor, Keyboard & Mouse support
Complete Software Package including:
Windows based Computer • Windows Home Edition Software
Password Protection
ECD CPK & SPC data and alarm logging with timed download or printout capability
Complete KIC & ECD Profiling & Storage Software including the following features:
5 Thermocouple “Real Time” profiling
Profile Storage/Overlay Software including the following features:
Profile Graph Storage of up to 500 graphs
Profile graph overlay of “benchmark” profile with current profile
Profile graph phase shifting to align two graphs
Moveable slope window providing average slope over given portion of graph
6 color graphics to distinguish between graphs
PID temperature control to ensure zone temperature stability to +/- 1C
Signal Light Tower to indicate system status
4 moveable casters for easy relocation around shop floor
Power controlled Clamshell Hood Lift • Single exhaust port for easy facilitation
208/240V, 60 HZ, 3 phase, 100 AMPS per phase • Left to Right Conveyor Travel
Floor space requirements: 142″L x 59″W x 63″H
Enhanced Frame Design • Breaker Over Current Protection
Factory training and installation • 3 Year Warranty on Heaters & Blower Motors
Optional Lifetime Warranty on Heaters & Blower Motors

Item 1:
1707MK-17
1707MK5 Ultra Low Nitrogen & Power Consumption Reflow Oven with
Semi Circular Balanced Flow Heater Modules

Item 2:
208V-17-5
Electrical Operation 208/240 volt, 100 Amps

Item 3:
EHC-CS-17
Edge Hold Conveyor (Computer Adjust) with 4.8mm / .187” long EHC Pins with Heavy Duty Overhead Trolley Center Tack System,
Front Rail Fixed – Maximum PCB with 22”

Item 4:
AL-17
Automatic Lubrication System for Edge Hold Conveyor

Item 5:
N2-17
Inert Atmosphere < 100PPM of Oxygen
(required on a nitrogen oven)

Item 6:
ULC-N2-17
Ultra Low Consumption Nitrogen – Auxiliary tunnels at entrance and exit of
oven to reduce N2 consumption. Balance Flow heater modules to
provide laminar flow and further reduce nitrogen consumption at
600-1200 SCFH (depending on PCB size).
Tunnel will be configured for a max. PCB size of 22”
(required on a nitrogen oven) includes mesh belt.

Item 7:
WLC-FF-17
Open Loop Cyclonic Cool Pipe Water Cooling and Flux Separation System –
Enhanced Blow-Thru Water Cooling Module for Ultra Low Product Exit Temperatures –
Closed Loop Temperature Controlled Cooling Module for Controlling Cooling Slope –
Water must be a 50/50 mixture of ethylene glycol –
does not include external chiller

Item 8:
N2 ON/OFF-PC-17
Nitrogen On/Off Capability (Computer Controlled)

Item 9:
OCL-17
Open Loop Nitrogen Monitoring & Control System

Item 10:
BBU-17
Battery Back-Up of Computer, Controller, Mesh Belt & Edge Hold Conveyor System

Item 11:
SMEMA-17
SMEMA Sensors for Electrical Interface Up and Down Stream

Item 12:
IFSC-17
Closed Loop Computer Fan Speed Control of Heater Module Blowers
(3 Groups – Top, Bottom & Reflow Zones; Speed Settings High, Medium & Low)

Item 13:
CFSC-17
Closed Loop Computer Fan Speed Control of Cooling Module Blowers

Item 14:
90YWTY-17
90 Day Reflow Oven Warranty, Installation & Training

Item 15:
N2D-17
Nitrogen to Air Reflow Oven Diverter to Eliminate the Chiller Requirement
Note: N2 Diverter will be installed during the installation of the oven

Item 16:
ETL-17
ETL Electrical and Safety Features to Comply Local Electrical Codes

Item 17:
35ITO-17
45MM Clearance Above & Below the Edge Hold Conveyor Pins

Item 18:
FGT-17
Freight from Fremont, CA to St. Louis, MO

Item 19:
BA-17
Board Animation for Tracking PCB’s Through the Reflow Oven

Item 20:
30IHM-17
30” Wide Heater Modules for Processing up to 22” Pub’s on
the Edge Hold & Mesh Belt Conveyor Systems

Item 21:
HCM-17
Closed Loop Temperature Controlled Cooling Module for Controlling Cooling Slope

Item 22:
ECDHI-17
Heller Industries CPK Monitoring & Profiling System Integrated into the
Heller Reflow Oven