Heesemann HSM.2 DB-2

2 Head Sander (Used)
Head 1: DB-S Head – Rotating Planetary Sanding Unit
Heesemann's rotating planetary sanding unit incorporates sanding discs
for the purpose of smoothing the work surface, breaking edges, seal sanding and texturing.

This head includes:
· 10 driven discs with quick changing device
· Rotation in both directions
· Central height adjustment
· 7.5 kW (10 Hp) motor to power the discs
· 1.5 kW (2 Hp) motor gear box
· Brush trimming: Flex Trim
· Tool Diameter: 150 mm (6”)
· Other brush discs available on demand
· One set of discs is included with sanding head

Head 2: DB-S Head – Rotating Planetary Sanding Unit
Heesemann's rotating planetary sanding unit incorporates sanding discs for the purpose
of smoothing the work surface, breaking edges, seal sanding and texturing.

This head includes:
· 10 driven discs with quick changing device
· Rotation in both directions
· Central height adjustment
· 7.5 kW (10 Hp) motor to power the discs
· 1.5 kW (2 Hp) motor gear box
· Brush trimming: Flex Trim
· Tool Diameter: 150 mm (6”)
· Other brush discs available on demand
· One set of discs is included with sanding head

Press-on Rollers Before and after Sanding Heads
A 50 mm roller at the infeed and outfeed of the sanding head helps to hold down
workpieces – particularly parts with very little surface area (i.e. face frames)
· spring loaded and adjustable
· Distance between rollers approx.. 500mm (20”)

Workpiece Blasting Device
Rotating compressed air nozzles for blasting workpiece surface.
Operate only if a workpiece is present to preserve compressed air.
Keeps the conveyor belt clean and helps clean dust out of profiled surfaces
(such as center panels on 5 piece doors) – so parts leave clean and ready to move onto next process

Technical Specifications:
Working height: 880 mm (36.2")
Workpiece thickness: 3 mm to 160 mm (0.118" to 6.29")
Working width: 1300 mm (51.2")
Transport belt speed: 3 mpm to 15 mpm (10 fpm to 49 fpm)
Sanding belt access: Left hand
Operators side: Left hand
Voltage: 480 Volts, 3 Phase, 60 HZ (24 V controls)
Full load amps: Approx. 100 amps at 480 Volts
Compressed air: ~25 cfm @ 100 psi
Dust extraction: ~4000 CFM