Hebrock AKV 3005 DK-F

Eedge banding machine
13.8 kW, 400 V, with joint milling unit including DIA tools,
- with hot melt adhesive indication on the workpiece for edge material up to 3 mm
- maintenance-free, coated glue pot, HF cutting station (300 Hz = 18,000 rpm) for front and rear edge overhang
- HF milling station (300 Hz = 18,000 rpm) with interchangeable plate milling cutter (combination version) and milling cutter fine adjustment from the operator side
- Free spaces for additional processing units (Hebrock system)
- Feed approx. 10 m/min.
- min./max. Workpiece thickness 8/40 mm
- Gluing up to 60 mm workpiece thickness
- Min. workpiece length 190 mm, min. workpiece width 80 mm
- Ready for use in approx. 5 minutes
- Cutting depth adjustment of the miter saw
- Signal lamp for workpiece sequence
- Robust chain drive
- Ergonomically arranged control panel
- Double roller top pressure bar
- PLC control including touchscreen screen
- Compressed air connection 7 bar
- Air consumption approx. 50-70 ltr./min.
- Extraction connection D 140 mm
- Dimensions 5000 x 1445 x 1600 mm
- Weight 1400 kg

Incl. following equipment:
- Separate pneumatic cutter setting (straight/radius)
- Corner rounding cutter including combination tool and pneumatic bevel/radius setting, minimum workpiece length 300 mm
- Radius scraper including pneumatic excavation device
- Surface scraper including pneumatic excavation device
- Cleaning station (buffing unit)
- Exchangeable tank system including adhesive discharge device
- Additional second exchangeable tank
- 3-point adjustment of cutter
- Special version minimum workpiece thickness 8 m
- Special version max. workpiece thickness 47 (50) mm
With max. edge thickness 3 mm without use of joining unit
- Plate spray device consisting of release agent and cleaning agent spray device