Harrison Engine Lathe 2500 RPM M300

HARRISON
M300


Swing 12.992" 330 mm
Swing Over Cross Slide 8.2677" 210 mm
Centers 39.37" 1,000 mm
Spindle Bore 1.5748" 40 mm
RPM 2,500 RPM 2,500 RPM

Centers Height 167mm (6-3/16”)
Admit Between 635/1000mm (25/40”)
Swing Over Bed 330mm (13”)
Over Cross Slide 210mm (8-1/8”)
In Gap Diameter 480mm (19”)
Length 117mm (4-5/8”)
Spindle Bore 40mm (1-9/16”)
Nose D1-4 Camlock
Morse Taper in Nose 3 MT
Speeds Number Number
Range 40 to 2500rpm
Motor 2.2kW

Leadscrew Diameter 28mm (1-1/8”)
Thread 6mm pitch or 4 TPI
Threads Metric Pitches 45 from 0.2 to 14mm
Imperial Pitches 52 from 2 to 56 TPI
Module Pitches 18 from 0.3 to 3.5 MOD
Diametral Pitches 18 from 8 to 56 DP
Feeds Metric 21 from 0.3 to 2mm/rev
Imperial 21 from .001 to .080in/rev

Cross Slide Width 140mm (5-1/2”)
Travel 190mm (7-1/2”)
Top Slide Width 82mm (3-1/4”)
Travel 92mm (7-1/2”)
Tailstock Quill Diameter 42mm (1-5/8”)
Travel 110mm (4-5/16”)

Morse Taper 3 MT
Weight 710/790kg (1562/1738lbs)
Dimensions L x W x H 1.68x.97x1.4m (66x38x55”)