Hardinge SECOND OPERATION LATHE 3900 RPM DV-59

HARDINGE DV-59 SECOND OPERATION LATHE
DSM59
Size: 09" SWING
Age: 1954

Swing Over the Bed: 9"
Bed Length: 30"
Hardinge Taper Spindle Nose with Internal Taper
to Accept 5C Collets
Spindle Hole: 1-1/4"
Spindle Capacity with Standard 5C Collets (None Supplied): 1-1/16" Round, 7/8" Hex., 3/4" Square
Bed Turret Ram Stroke: 3-1/2"
Diameter of Bed Turret Holes: 5/8"
6 Position Bed Turret Adjustable Stops
Maximum Distance from Spindle Nose to Turret Face: 16"
(8) Spindle Speeds: 230 to 3900 RPM Thru Hi & Low Range Via V Belt Change
Hard Dovetail Bed Ways: 3-3/8" Wide

EQUIPPED WITH:
(1) Turret Tool Holder
(1) Quick Acting
(26) Assorted 5C Collects
(1) Tool Holder Block on Cross Slide
(1) OEM Manual
(1) 6 Position Bed Turret with Adjustable Stops
(1) Turret Tool Holder
Original Coolant Pump is Built in (But May Not be Operational)
Control Levers for: High-Low-Start-Stop and Forward-Reverse
DV-59 Machine with DSM-59 Control System
Lever Type Collet Closer
1-1/2 HP Baldor 2-Speed Motor, Wired for 3 Phase, 60 Hz, 208/230 Volts Only
Overall Dimensions: 56" L x 27" W x 50" High (on 1-1/2" blocks) x 1,000 Lbs.