Haas Haas CNC Control 1400 rpm ST-45 Chucker 2 Axis

Haas ST-45 Chucker
2014

Swing Diameter
Over Front Apron 34.5 in
Over Cross Slide 25.5 in

Capacities
Max Cutting Diameter (varies with turret) 25.5 in
Max Cutting Length (without workholding) 44 in
Bar Capacity 6.50 in

Travels
X Axis 17.0 in
Z Axis 44.0 in
Feedrates
Rapids on X 710 ipm
Rapids on Z 710 ipm

Spindle
Spindle Nose A2-11
Drive System 2-Speed Gearbox
Max Rating 40.0 hp
Max Speed 1400 rpm
Max Torque 1400 ft-lbf @ 150 rpm
Spindle Bore ø7.00 in

Turret
Number of Tools 12-Station BOT
OD vs ID Tools Any Combination (will vary with turret)
Boring Bar Rear Clearance (from back of turret ) 4.37 in

General
Coolant Capacity 95 gal
Air Requirements
Air Required 4 scfm @ 100 psi
Inline Air Hose 3/8 in
Coupler (Air) 3/8 in
Air Pressure Min 80 psi
Electrical Specification
Full Load Amps (3 Phase) – High 35 A
Dimensions – Shipping
Domestic Pallet Dimensions 217 in x 96 in x 105 in
Weight 25900 lb

Equipped With (subject to buyer verification):
Haas CNC Control
18” Chuck
6.5” Bar Cap
NO Tailstock
Chip Conveyor