Haas DT2 CNC Drill & Tap 3 Axis

HAAS DT2 CNC Drill & Tap
2016

TRAVELS S.A.E METRIC
X Axis 28.0 in 711 mm
Y Axis 16.0 in 406 mm
Z Axis 15.5 in 394 mm
Spindle Nose to Table (~ max) 21.5 in 546 mm
Spindle Nose to Table (~ min) 6.0 in 152 mm
SPINDLE S.A.E METRIC
Max Rating 15.0 hp 11.2 kW
Max Speed 10000 rpm 10000 rpm
Max Torque 46.0 ft-lbf @ 1700 rpm 62.0 Nm @ 1700 rpm
Drive System Inline Direct-Drive Inline Direct-Drive
Taper BT30 BT30
Bearing Lubrication Air / Oil Injection Air / Oil Injection
Cooling Air Cooled Air Cooled
TABLE S.A.E METRIC
Length 34.0 in 864 mm
Width 15.0 in 381 mm
T-Slot Width 0.626 in to 0.630 in 15.90 mm to 16.00 mm
T-Slot Center Distance 4.92 in 125 mm
Number of Std T-Slots 3 3
Max Weight on Table (evenly distributed) 250 lb 113 kg
FEEDRATES S.A.E METRIC
Max Cutting 1200 ipm 30.5 m/min
Rapids on X 2400 ipm 61.0 m/min
Rapids on Y 2400 ipm 61.0 m/min
Rapids on Z 2400 ipm 61.0 m/min
AXIS MOTORS S.A.E METRIC
Max Thrust X 2550 lbf 11343 N
Max Thrust Y 2550 lbf 11343 N
Max Thrust Z 4200 lbf 18683 N
TOOL CHANGER S.A.E METRIC
Type SMTC SMTC
Capacity 20+1 20+1
Max Tool Diameter (full) 2.0 in 51 mm
Max Tool Length (from gage line) 7 in 178 mm
Chip-to-Chip (avg) 1.6 s 1.6 s
TAPPING S.A.E METRIC
Max Tapping Speed 5000 rpm 5000 rpm
GENERAL S.A.E METRIC
Coolant Capacity 55 gal 208 L
AIR REQUIREMENTS S.A.E METRIC
Air Required 4 scfm @ 100 psi 113 L/min @ 6.9 bar
Inline Air Hose 3/8 in 3/8 in
Coupler (Air) 3/8 in 3/8 in
Air Pressure Min 80 psi 5.5 bar
DIMENSIONS – SHIPPING S.A.E METRIC
Domestic Pallet 100 in x 91 in x 99 in 254 cm x 231 cm x 251 cm
Export Pallet 100 in x 91 in x 99 in 254 cm x 231 cm x 251 cm
Weight 5350 lb 2427.0 kg

EQUIPPED WITH:
HAAS CNC CONTROL
20 POSITION TOOL CHANGER
15,000 RPM SPINDLE
COOLANT SYSTEM
4TH AXIS ROTARY TABLE,
PROBE
PCOOL,
REMOTE JOG HANDLE,
HIGH SPEED MACHINING
RIGID TAP,
ETHERNET
CHIP AUGER