H 600

Hoku single-shaft shredder
H 600 Compact, robust, high throughput

Technical manufacturer description:
The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials
(hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high
and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material.
The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent.
The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 85-95 rpm.
The concave-ground, aggressive and 4-fold rotating knives / reversible cutting crowns are located in milled knife pockets knife pockets on special knife carriers.
This highly efficient system guarantees, through the reduction of the cutting gap between the counter knife and rotor,
it guarantees high throughput, low energy consumption and optimum optimised discharge of the shredded material.
Chip size (10 - 60 mm)

Technical data:
Hopper opening 600 x 800 mm
Hopper capacity 0.6 m³
Working width of the rotor 600 mm
Rotor diameter 260 mm
Drive power 15 kW
Rotor speed 90 rpm
Number of knives: 14 pieces + 2 pieces
Type and size of knives: concave/40 x 40 mm, reversible cutting crowns
concave/ 30 x 30 mm, broaching knives
Screen perforation: 15/20 mm
connected load: 400 V +/- 5% / 50 Hz

included:
Switch cabinet (Rittal) with 5 m cable
Electrical control (SPS Siemens)
Star-delta start-up
Rubber oscillating elements
E-rotor with blade pockets milled into the profile
Gear limit switch
1st row of knives
Hold-down device on the pusher for long and large parts
Large 40 x 40 mm blades for optimum material feed
Very robust gearbox
Special broaching blade to prevent lateral jamming