GPI FORMER 20 NX, PACKER 20, CP150-DK, P60

RSC (American Case) CARTON ERECTOR, model FORMER 20 NX
- Carton erecting section
- Lower carton flap closing
- Carton magazine
- Carton conveyor
- Carton taping units

CARTON PACKER, model PACKER 20
- Product infeed conveyor
- Pick-up system

AUTOMATIC ADHESIVE TAPE CARTON CLOSER/SEALER CHNX
- Carton conveyor
- Carton flap closing unit
- Carton taping units

CHECK WEIGHER CP150- DK
Weighing system: With load cell
Management electronics: PWS LAUMAS grader
Number of selectable programmes: 6
Max. work speed: 30 pieces per minute
Capacity: 0 ÷ 70.000 grams
Division: 10 grams
Precision: ± 50 grams
Self-calibration: Production model
Threshold settings: Minimum and maximum weight
Data displayed: Weight measured
Signals: Upstream machine shutdown , production model
Alarm flasher: Production model
Work temperature: 0 ÷ 40 °C
Mechanical features: Painted steel and aluminium construction, degree of protection for electrical appliances IP 54
Weight: 100 Kg
Electrical features: Mono-phase power supply 220V ± 10% 50Hz + earth

Palletizer Miniportal

AUTOMATIC SHUTTLE
Automatic turntable stretch WRAPPING MACHINE, model P60
- turntable
- film pre-stretch electronic carriage
- film unwinding with tachogenerator
- clamping, cutting and sealing device for the film tail edge

ELECTRICAL CONTROL PANEL and TOUCH-SCREEN DISPLAY ASEM HMI 25

Product on the pallet: to be defined
Pallet size: 800x1.200 mm – 1.000x1.200 mm
Pallet run front: Short side advancement with axes perpendicular to rollers.
Pallet advancement on film attachment gripper side conveyor: yes
Maximum load height: 2.100 mm (pallet included)
Minimum load height: 500 mm minimum to wrap
Max load weight: 1.500 kg
Min load weight (if lower than 200 kg)
Load over-extension from pallet edges: to be verified
Conveyors height: 500 mm
Possible production - 45 pallets/hour as it follows:
- 12 wrappings lateral cycle for a 1.800 mm high load
- 12 m/min. conveyor speed

Turntable max speed: 14 revs./min
Conveyor speed: 12 m/min
Stretch film spool size: Max standard spool diameter 300 mm, core diameter 76 mm, max band width 500 mm., film thickness 17/23 micron. Film quality must be suitable for pre-stretch by the electronic pre-stretch carriage.
Power supply voltage: 400 V – 50 Hz. – three-phase with neutral + earth
Control voltage: 24 V dc.
Installed electric power of the wrapping machine (accessories and pallet conveyors not included): 2.4 kW.
Protection class: IP 55, excluding electric motors, rotating contacts and control panels
Noise: Lower than 78 db(A)
Pneumatic power supply: 6 Atm, non-lubricated dry air
Air consumption: 160 nL/cycle
Environment temperature: From 5°C to 40°C with humidity at 40°C ≤ 80 %
Ceiling lower line height: to be verified
Approx. weight of the wrapping machine (accessories and pallet conveyors not included): 1,600 Kg