Gildemeister DMG CTV 250 Chuck diameter: 250 mm

Gildemeister DMG CTV 250
Year of Manufacture: 2003

Workspace
Chuck diameter: 250 mm
Plan transfer stroke X: 800 mm
Longitudinal stroke Z: 300 mm
Feed
Rapid speed X: 100 m/min
Rapid velocity Z: 45 m/min
Spindle box
Spindle head (flat flange): 170h5 mm
Spindle diameter in the front bearing: 120 mm
Spindle bore: 79 mm
Main drive
Power of the three-phase hauplan drive: 22 kW
Torque ED 100%: 210 Nm
Speed range: 20 – 5000 rpm
C-axis
Speed range: 0-100 rpm
Torque (holding torque brake): 240 Nm
Point silence accuracy: < 0.02 degrees
Tool carrier
Number of tool stations: 12
Tool holder according to DIN 69880
Cylinder shaftdiameter: 40 mm
Drive power (40% ED): 10.8 kW
Torque: 28 Nm
Speed, max.: 6000 rpm
Hydraulics
Content, complete: approx. 25 L
Pressure max.: 80 bar
Pressure for clamping device, max.: 70 bar
Coolant device
Content: approx. 25 L
Pump power: 1.7 kW
Flow rate at 6 bar: 20 l/min
Fluid grease lubrication
Content: 1.8 L
Y-axis option
Rapid velocity Y: 10 m/min
Feed force: 20000 N
Hub: ±50
Electrical connection
Total connection value: 50 kVA
Voltage: 400 V
Frequency: 50 Hz
Protection (sluggish) according to VDE 0100: 80 A
Permissible voltage fluctuation at 400V: ± 10%
Decrease
Machine acceptance: according to DIN 8605
Ambient conditions
Permissible ambient temperature: from +15 to +35°C
relative humidity: 75%
installation height: 1000 m above level
Weights
Net weight of the machine without chip conveyor: approx. 7500 kg
Gross weight of the machine for truck freight: approx. 7800 kg
Dimensions
Machine without chip conveyor L x W x H: approx. 2600 x 2200 x 2800 mm