Giardina Flash OFF paint drying system and GP-Jet jet dryer+ IRM

Total length 15m
1.POS GIARDINA - FLASH OFF - EVAPORATION TUNNEL, model AC 7
Evaporation tunnel, total length 7000 mm
Air intake from inside the factory through filters
Air heating with copper/aluminium heating element
Air blows against the feed direction of the workpiece
Removal of soaking gases from the oven by overpressurising the circulating air
Controlled ventilation system
Automatic temperature control system
Internal width of the machine 1380 mm
Effective width of the machine 1320 mm
Piece length min. 300 mm
Piece thickness max. 90 mm
Bonnet length 6000 mm, width 1810 mm
Conveyor length 6000 mm
Infinitely variable feed speed
Oven intake air volume 8000 m3/h
Oven exhaust air volume 6000 m3/h
Outlet size 2 x 240 x 240 mm
Inlet fan 3.0 kW
Exhaust fan 1.5 kW
Temperature rise in the oven max. 40 °C compared to the hall temperature
Total output 120,000 kcal
IP 55-protected electrical appliances (electrical appliances, switches, fuses, remote switch and thermal protection are located in the control cabinet in a separate control cabinet - cable length 8 m)
Control switches are low-voltage switches
The main part of the electrical equipment is Telemecanique
EEx-d protected motors

2. POS GIARDINA - GP JET - JET AIR-8 nozzle blowing (DRY) + IRM
Nozzle blowing tunnel, total length 8000 mm, width
Air intake from inside the factory through filter
Air heating with copper/aluminium heating element
Blowing air onto the surface of the workpiece through cone nozzles. Removal of soaking gases from the furnace by overpressurising the circulating air
Controlled ventilation system
Electronic temperature control of the air blown by the nozzles and a servo-controlled temperature control system
Internal width of the machine 1380 mm
Useful width of the machine 1320 mm Unit length min. 300

IP 55-protected electrical appliances (electrical appliances such as remote switches and thermal protection are located in the control cabinet in a separate control cabinet - cable length 8 m)
Control switches are low-voltage switches
The main part of the electrical equipment is Telemecanique
Conveying mortar 1.5 KV
-JET AIR-8 nozzle blowing (DRY) + IRM
Nozzle blowing tunnel, bonnet length 8000 mm
Air intake from inside the factory through filter
Air heating with copper/aluminium heating element
Air is blown onto the surface of the workpiece through cone-shaped nozzles
Removal of soaking gases from the oven by overpressurising the circulating air
Controlled ventilation system
Electronic temperature control of the air blown by the nozzles and a servo-controlled temperature control system
Internal width of the machine 1380 mm
Useful width of the machine 1320 mm
Piece length min. 300 mm
Piece thickness max. 90 mm