GEA PMA + Sirocco 1200

GEA Niro Pharma Systems Aeromatic Fielder mixing/drying system
consisting of:
(1) GEA Niro Aeromatic Fielder high shear mixer, type PMA 1200.
Polished stainless steel construction,
Total capacity 42.37 cu ft (1200 liter), working capacity 31.78 cu ft (900 liter).
Measurements : 4’9” (1500 mm) , x 2’36” (725 mm)
1 Chopper. Lit with counter weight. On stand.
Siemens control panel., year 2008. incl. integrated
For high shear pelletization, a special mixing tool is
available to optimize the process and maximise the output.
Wet Pelletizing: This process uses a rotary atomizer spray
to achieve excellent dispersion of binder liquid through the mix,
and a special high-speed rotation blade
for maximum movement of the product,
for more efficient pelletization. A PTFE container-lining minimizes
the need for ‘top and tailing’, even with the most cohesive
of products. Studies have shown that the PTFE liner,
unique to GEA can increase production efficiency by as much
as 40%. Alternatively, an extruder may be used,
similar to those used for the manufacture of pellets.
In a typical set-up all ingredients are pre-blended
in a container after dispensing. Depending on the extruder
design the liquid can be added in the extruder or mixed separately
to the correct consistency.
The material produced by the extruder is now transferred directly
into a continuous fluid bed where it is dried to the desired moisture level.

Melt Pelletizing: This is an exceptionally fast method of
producing pellets in a single step.
The active material and binder are mixed in binder
form then heated until the binder melts.
A single batch is processed typically in just 15-20 minutes,
and needs no further drying.

(2) GEA cone mill,
(3) GEA Niro fluid bed dryer, type Sirocco 1200,
Working capacity 958 liter,
Rated for 150 PSI (10 bar), year 2008. Incl. controls. Include Cip System , explosions Valves included