Gannomat Protec 0571A

CNC machining center
Machining unit with:
PowerBlock with 21 spindles and 1 grooving saw
- 13 vertical drilling spindles
- 6 horizontal drilling spindles in Y
- 4 horizontal drilling spindles in X
- 1 grooving unit in Y
Fourth drilling axis in Y
Milling unit Profit, 4.5 kW, 3000 - 18000 rpm with frequency converter

Workpiece sizes and weights:
- Workpiece width (X) min. 60 mm / max. 1000 mm
- Workpiece thickness (Z) min. 6 mm / max. 60 mm
- Workpiece length (Y) min. 250 mm in throughfeed mode, max. 5600 mm programmable workpiece length in software
- Workpiece weight max. 75 kg

Air connection 6 bar
Electrical connection 400 V, 3 Ph, 50 Hz, 11 kVA, 16 A
Fuse protection 32 A
Control voltage 24DC V
Operating pressure 0.8 MPa / 112 psi

- Counter-pressure device from above
- Roller table 765 mm (Y-axis), foldable, for machine front, 500 mm W
- Roller table 765 mm (Y-axis), foldable, for machine rear, 500 mm W
- Auxiliary fence 600 mm with integrated rollers for roller tables
- Tool set Protec:
1 HW roof point drill bit Ø 5x70 mm (NL 35 mm) left
3 HW dowel drill bits Ø 5x70 mm (NL 35 mm) right
4 HW dowel drill bits Ø 5x70 mm (NL 35 mm) left
5 HW dowel drill bits Ø 8x70 mm (NL 35 mm) right
3 HW dowel drills Ø 8x70 mm (NL 35 mm) left
2 HW dowel drills Ø 10x70 mm (NL 35 mm) left
1 HW cup drill Ø 15x70 mm (NL 35 mm) left
1 HW cup drill Ø 20x70 mm (NL 35 mm) right
1 HW cup drill Ø 35x70 mm (NL 35 mm) right
- TC slot milling cutter Ø 125/30 mm, slot milling width (SB) 8.3 mm, Z = 18, LI, LEUCO
- Indexable insert end mill, Z1+1 HW with WP drilling cutter (D) Ø 20 mm
- ASCII import postprocessor for "GANNOMAT-EDITOR" programming system for importing ASCII files, structure specification by Gannomat
- Extraction manifold Ø 160 mm / Ø 80-80-80 mm, 196 mm grid