Frigoscandia Frigoscandia Used Flow Freezer MX32/Glazo Freezer P4 232 kW

Frigoscandia Used Flow Freezer MX32/Glazo Freezer P4 232 kW


Frigoscandia Flow Freezer model MX32, manufacture nr 240065, year of manufacture 1995, 3 x 380 V – 3 x 460 V 50/60 Hz 42 kW/67 kVA E-power, capacity of 1950 kg/h based on peas with an input temperature of +15°C and an output temperature of -18°C, refrigerant R717/Ammonia/Freon pump circulation. Flow freezer is equipped with ADF (automatic defrost system for a longer continuous blast freeze process, max. 22 hour production), 1 piece galvanized cooler and stainless steel switch box with Siemens PLC. Plastic two-stage belt system (patent by Frigoscandia) which works as follows: two separate plastic belts goes into the tunnel in line after each other with a pre-freeze section where the products are slightly frozen on the outside, then the products go to the after-freeze section (2nd belt) where the products are frozen into the core up to a minimum temperature of -18°C.
Frigoscandia Glazo Freezer model P4, year of construction 1995, 380 – 460 V 50/60 Hz, 3 Ph 9 kW/11.5 kVA E-power, 80 dB, weight 2000kg, capacity 1950kg/h based on peas with an input temperature of +15°C and an output temperature of 0°C, refrigerant R717/Ammonia/Freon pump circulation. Glazo freezer is equipped with stainless steel s infeed shaker, tray width 900 mm, input/output height 1300mm / 725 mm, dimensions of isolated housing (LxWxH) 2230 mm x 3150 mm x 2020 mm. Evaporating block with ventilator motor. Cooling capacity of the Glazo Freezer is approx. 35 kW at evaporating temp. of -10°C.
The Glazo Freezer that is placed in line with the Flow Freezer works according to the following principle: the product that comes from the production line will be frozen partially on the outside before it will be distributed over the belt of the Freezer by the infeed shaker, it gives extra capacity in the Flow Freezer.

Freezer will be delivered with original floor, but without panels/housing. Further, the freezer will be completely checked by Comron International after sale in case of mechanical/electrical defects. The gearboxes will be supplied with new oil, the evaporator blocks will be tested on nitrogen pressure and the flow freezer will be delivered with a 3 months guarantee on the main components.

Cooling capacity:
232 kW/68 tons
Type of refrigerant:
R717/Ammonia/Freon Pomp
Voltage:
380 / 460 V
Absorbed power:
56 kW
Year of Manufacture:
1996
Dimensions (LxWxH):
380 x 470 x 370 cm