Felder G 263-4

Workpiece length at least 210 mm
Edge thickness0.4 mm 2 mm
Motor voltage3 x 400 V
Workpiece width at least 95 mm
Workpiece thickness10 mm 45 mm
Joining unit application-controlled can be switched off
Continuous edge feed via support plate
Edge feed for roll materials from 0.42 mm thickness, strip edge banding with individual feed
Gun shears for continuous edge material up to 2 mm thickness in hard PVC/ABS
Glue unit Teflon-coated, 1.0 kg for hot melt adhesive granulate (~ 250lfm per 1kg granulate on a 19mm plate)
Pressure unit mechanically pre-tensioned, 1 straight pressure roller and 1 pressure roller
Gun shear unit with 2 cutting knives for end cutting
Multifunctional milling unit 11,000 rpm, 0.37 kW, radius milling, chamfer milling for thin edges
Tooling for radius 2 mm
Radius scraper unit, mechanically switchable for R= 2 mm including chip collection box for scraper sections
Polishing unit, 2 motors, 1400 rpm, 900 W
Control panel with LCD display and keypad
Workpiece transport via chain conveyor
Feed speed 7 m/min (~ 250lfm/h)
Extendable workpiece support
Optional equipment
Surface scraper, can be switched on mechanically
Spray device for cleaning agent on polishing unit (!21/!30A)
with infrared heating lamp for preheating the panel edge