EV 433

Kombimatec EV 433 Corner cleaner
3 Phase
Milling Cutter min. dia. 80 mm
Milling Cutter max. dia. 200 mm
Cutter bore 32 mm Knife 2,5 or 3,5 mm
Mains voltage 220/380, 3~, 60 Hz,
6/3, 10A Power output 1,5 KW Milling spindle 2860 rpm
Compressed air connection 7 bar/100 psi Air consumption 60 ltr per cycle

Manufacturer’s note:
Automatically grooves both top and bottom profile faces and mills outside edge in one operating cycle.
Type EV443/32 also drills gasket slot groove.
Once set the automatic profile identification facility selects the correct program cycle for each profile.
Total flexibility with full operation or isolation of individual functions.
Variable milling cutter dwell time for optimum performance.
Single side grooving selection for wood grain, foil or acrylic covered profiles.
Small footprint measures only 860 mm x 980 mm.
Typically accommodates frames down to 25 cm.
Takes profiles up to 125 mm wide.
Multi-position spindle takes up to 3 milling cutters.
Independent cutter shaft mounting with flexible drive eliminates motor strain.
No cutter matching.
Computer controlled.
One touch locates frame and starts cutting cycle.