Euromac MTX Flex 6 Hybrid 300 kN

Euromac MTX Flex 6 Hybrid
New in 2014

Pressing force 300 kN (30 t) Tools A, B, C, D Number of
stations in turret 6 (size D) Number of rotary stations 3
Max. number of tools 60 of which rotary -

continuously 360° 30 Maximum punch diameter (size
.D)– separate 81 mm Maximum punch diameter in
XMTE4M magazine 4 x 31.7 mm Maximum punch
diameter in XMTE6M magazine 6 x 24.0 mm Maximum
punch diameter in XMTE10M magazine 2 x 24.8 x 12.7
mm Working range in the Y axis (with Multitool) 1300
mm Working range in Y axis (single tool) 1250 mm
Working range in X axis (with Multitool) 2550 mm
Numerically controlled stroke depth 0.1 – 31 mm
Automatic repositioning of clamps in X axis up to
10,000 mm Max. speed positioning in the Y+X axis 80
m/min. Axis acceleration 10 m/sec² Number of strokes
– ( step 1.0mm ) 1000/min USB port 6 Weight 7800 kg
Max. jaw opening 11 mm Max. stroke 31 mm Power
supply 3 x 400 V/50 Hz Machine power 8.5 kW Average
consumption 4.5 kW Positioning accuracy  0.05 mm
Repeatable forming accuracy  0.10 mm Maximum
sheet weight 200 kg Maximum positioning speed can
be used up to board weight 80 kg. Speed reduction to
50% for weights from 100 to 200 kg. Pneumatic
connection 6  1 bar Air consumption 0.1 Nm/h Oil
filling for hydraulic system - hydraulic oil 135 Overall
dimensions of the machine - Y x X x Z 3630x4840x1900
Machine functions: - punching, simple bending,
thread forming, special forming, endless extrusions,
edging, marking, engraving, nibbling, sheet metal
trimming without a tool trace, automatic
programmable lubrication of tools and multitools,
two repositioning cylinders – hold the sheet while the
clamps are moved, fully guided tools – very precise
guidance, tool length compensation, silent punching
– the possibility of programming any speed of
movement of the ram, deburring edges, waste
disposal, 2D control panel, the possibility of
converting 2D and 3D drawings, teleservice, fault
diagnosis, external programming, optical barrier, 2
clamps, the possibility of programming directly on the
screen of the die-cutting machine. The machine is in
good technical condition, it is possible to test it after
prior agreement. The machine worked in single-shift
operation, regularly serviced.