Erema Intarema 1512-TVE Plus Pelletizing Line

Nominal capacity range 850-1250kg/hr depending on feed material,
currently with 8505 run hours consisting of the following:
-FB_7000_1100_SH cleated feed conveyor,
1100mm(43″) wide x 7000mm(275″) long cleated inclined belt.
-DTF 1300/1100/400 pass thru over belt metal detector,
400mm(15.7″) tall opening.
-Erema Intarema extruder, model I_1521_TVEplus with ecoSave,
preconditioning densifier, with 4 blade rotor,
under driven by 250kw(335hp) ac motor, single screw melt extruder,
3S technology mixing, driven by 250kw(335HP) ac motor.
-powder exhaust system with cyclone collector and blower for preconditioning densifier
-LF_2_354 laser filter, 1295 sq cm filter area, scraper driven by 4kw motor drive on stand.
-dual side degassing vents with 4.3kw liquid ring vacuum pump system
with water circulation system, pump, and stainless steel water basin.
-HG_244D hot die face pelletizer driven by 2.2kw(2.9HP) ac motor
with (5) blade cutting head, stainless steel water ring housing
with water pump station with heat exchanger and circulation pump.
-GS_2010_1000 pellet dewater screen, stainless steel screen deck,
driven by dual .30kw vibro motor with water catch basin.
-GZ_1000_M15 centrifugal pellet dryer, 500mm(19.6″) diameter driven
by 22kw(29.5HP) ac motor pellet transport system with cyclone collector
with rotary air lock and blower. -integrated EL_Smart operator hmi control station,
control panels with PLC controls, and extruder motor frequency controllers.
built 2018