Engel Duo 17060/2000 2000 T

Engel duo 17060/2000 injection molding machine
Robot viper 60 - RC300 integrated
Z= 4280 mm
X= 1800 mm
Y= 2600 mm

Injection system
Screw diameter mm 135
Screw pitch mm 610
Maximum injection capacity cm³ 8731
Screw speed min⁻¹ 125
Screw torque Nm 14000
Maximum screw speed at reduced torque min⁻¹ 135
Reduced torque at max. speed Nm 12963
Reduced screw speed at max. torque min⁻¹ 112
Maximum screw torque at reduced speed Nm 15630
Regeneration efficiency (3-zone screw) g/s 222.9
Regeneration efficiency (barrier screw) g/s 279.2
Injection Injection efficiency cm³/s 1904
Injection volume cm3 8731
Injection weight g 7860
Injection pressure (regeneration) bar 1648
Injection pressure (maximum) bar 2000
Nozzle Nozzle stroke mm 1100
Nozzle pressure force kN 210
Material cylinder L/D ratio - 25
Heating zones (including nozzle) - 8
Heating power kWel 88.5

Closing system
Closing force kN 20000
Minimum closing force kN 2000
Opening force (with pressure cushion) kN 1600
Force opening kN 614
Opening stroke mm 3000
Max. distance between platens mm 3800
Min. mould height mm 800
Max. mould height mm 1800
Spacing between tie bars (h x v) mm x mm 2000 x 1600
Size of mould plates (h x v) mm x mm 2700 x 2430
Max. mould weight (moving platen) kg 41330
Max. mould weight (stationary platen) kg 41330
Max. total mould weight kg 62000
Dry cycle stroke (Euromap 6) mm 1400
Dry cycle time (Euromap 6) s 5.5
Ejector Ejector stroke mm 400
Ejector force kN 385
Drive Installed power of main motors kW 265
Capacity oil tank (injection unit) l 1600
Oil filter Max. cooling capacity (at 25°C) kWcool 43.2
Water consumption (at 25°C) m³/h 6.3