Eko-Prod ZO J09Y11 / 6, Continuous flow evaporator
EUROPE (Central and Eastern)
PP-02
The device is used to evaporate fish in cans at 920C
Dimensions:
Total length - 18,400 mm
Total width - 1,300 mm
Total height - 2.330 mm
Technical data:
The machine consists of 3 sections:
- loading section;
- steam section consisting of two segments;
- unloading section;
Steaming chamber length - 12,000 mm;
The width of the steam chamber - 1.270 mm;
At the top, the steam chamber is covered with removable covers (a total of 20),
and it is closed at the bottom with hinged covers (12 pcs in total);
The walls of the steam chamber as well as the upper and lower covers are filled with heat-insulating material;
The distribution of steam inside the steam chamber takes place via
a steam collector consisting of a central pipe with a cross-section of approx. Ø 60 mm
and side loops with a cross-section of approx. Ø 12 mm. Drilled in each side loop
There are 9 holes with a cross section of approx. Ø 2. There are a total of 32 in the entire pairing section
side loops. Steam is delivered in the central part of the chamber
steam between the two segments of the pairing section;
Evaporating temperature - up to 100 ° C;
Steam consumption - up to 200 kg / h at p = 0.3 Mpa;
Compressed air pressure - 0.6 Mpa;
Time of passage through the chamber adjustable - 12 - 45 minutes;
Capacity - up to 10,000 cans / h;
Maximum height of a steamed can - 80 mm;
Ladder carrying tape - made of stainless steel rods Ø 8 mm;
Belt width - 1.150 mm;
Spacing between the bars of the tape approx. 25 mm;
Drive power - 4.5 kW;
The whole device is made of stainless steel - type 304;
Mode of operation - continuous;
Weight approx. 3,000 kg.