Doosan Fanuc 31i CNC Control with EZ Guide i Fanuc Conversational Programming 5000 rpm PUMA 2100SY 5 Axis

DOOSAN PUMA 2100SY
Year: 2011

CAPACITY:
Swing over bed (swing over front door) 780 mm (680mm) (30.7" (26.8"))
Swing over carriage 630 mm (24.8")
Maximum turning diameter 406 mm (15.98")
Maximum turning length 520 mm (20.47”)
Distance between main and sub spindle noses 850 mm (33.46”)

MAIN SPINDLE:
Spindle speed 5,000 rpm
Spindle nose A2-6
Draw tube ID 68 mm (2.68")
Spindle bore diameter 76 mm (2.99")
AC spindle motor (15% ED) 22 kW (30 hp)

C-AXIS – MAIN SPINDLE:
Minimum programmable angle 0.001 degree
Rapid traverse rate 400 rpm

SUB SPINDLE:
B axis travel (sub spindle) 590 mm (23.2”)
Sub spindle guideway span 335 mm (13.2”)
Spindle speed 6,000 rpm
Spindle nose A2-5
Draw tube ID 50 mm (1.968")
Spindle bore diameter 62 mm (2.44")
AC spindle motor 30 min. rating 15 kW (20 hp)
Rapid traverse rate 30 m/min (1,181 ipm)

C-AXIS – SUB SPINDLE:
Minimum programmable angle (degrees) 0.001 deg

BED, SADDLE & CROSS SLIDE:
Angle of slant bed 30-degree
X axis travel 260 mm (10.2”)
Z axis travel 590 mm (23.2”)
X axis guide way span 321 mm (12.63”)

TURRET:
Number of tools 12
Number of index positions 24
Tool holder type BMT-55P

ROTARY TOOLS:
Rotating tool RPM 50 to 5,000 rpm
Rotating tool spindle motor (15 min. rating) 5.5 kW (7.5 hp)
Rotating tool collet type ER 25
Milling collet capacity 1/8" to 5/8"

Y-AXIS:
Y-axis travel (total) 105 mm (±52.5mm) (4.13” (±2.065”))
Y-axis travel (above center) 52.5 mm (2.065”)
Y-axis travel (below center) 52.5 mm (2.065”)

GENERAL:
Machine weight 6,000 kg (13,225 lb)
Floor space - length x width 3,415 mm x 1,905 mm (125” x 74”)
Floor space – length with hinge belt chip conveyor 4,279 mm (168.5”)
Machine Height 2,163 mm (74”)
Height from floor to spindle center 1,110 mm (43.7”)
Voltage required 205-235V/3 ph/60 Hz
Power requirement 49 kVA (129 Amps @ 220 Volts

Chip Conveyor
Tool Setter
Collet for Main and Sub spindle
Misc Live tooling (2 Live Holders) and tool holders
Parts Catcher and Part Conveyor
LNS Quick Load Servo 65 Bar Feeder - 2.625" Max. Dia. Bar Capacity