DMT BOPP Coextrusion Line

Number of layers 3
Material BOPP
Width (mm) 6800

Extruder 1 Description
Manufacturer: Davis Standard
co-extruders with max output 150 kg/hr and 200 kg/h DC drive - 02 Co extruder motors Stand by L/D 30:1 Included with double filters with surface area: 0.81m2/unit

Extruder 2 Description
Cascade main extruder TM 133 MW, 2800 kg/h, Melt pump Manufacturer: Maag AC drive Main filter: L.666 Surface area: 6.36 m2

Extruder 3 Description
Co extruders, Manufacturer: Davis Standard, 2 co-extruders with max output 150 kg/hr and 200 kg/h DC drive - 02 Co extruder motors Stand by L/D 30:1 Included with double filters with surface area: 0.81m2/unit

MDO description
14 pre-heating rolls - Electrical heaters; 4 stretching rolls - Circulating oil; 2 annealing rolls - Electrical heaters; 5 nip rolls; AC drive; Stretching ratio 1:1 - 1:6

TDO description
Chain and chain track System; Heating system: circulating air via individual heating system / zone (Electrical heater, motors, fans, sensor, etc) Edge guide system at inlet

Pull roll unit
Cromed Rolls chilled by water; Edge trim on-line recycling unit; 2 corona treatment stations (up and down - Double treated) AC drive Thickness Gauge X-ray: - Measurement range: 5 - 100 micron

Rewinder description Turret Automatic change

Slitter and Rewinder: - Atlas Slitter and Rewinder 6.8 m (1000 m/min - CW964) 10 "Stations"

Max mechanical speed: 280 m/min
Edge recycling system
Pneumatic conveying system
Cyclone to separate resin and conveying air
Metal separator
Mixing hopper
Suction conveying for Co-Extruder Edge trim recycling
Edge trim grinder
Conveying fans
Recycling System
Erema 500 kg/h RM 80T

Utilities:
Compressor
Boiler
Silos
Mill Rolls
Mill Roll Stands (corona and nip)
Nip rolls stands
Over Head Crane (10 TM)