Dimter OptiCut 350-4 R

Wood dimensions to be processed:
Input lengths min/max. 500 - 6500 mm
Full optimization up to max. 1500 mm
Input widths min/max. 40 - 300 mm
Input thicknesses min/max. 15 - 120 mm
Wood cross-sections max. 300 x 40 mm
max. 200 x 120 mm
Fixed lengths after sawing min. 510 -2800 mm

Special application:
Cutting blocks, length min/max. 100 - 200 mm
(Attention: Multiple block lengths at the end of the board.
No sorting, blocks are transported to the end of the belt of the sorting line and fall into the customer's grid box)
Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood properties with minimal resin content and even surface.
min. tolerance up to 1 m fixed length
max. tolerance for longer parts up to 2.5 m).
Thickness tolerance +/- 3 mm
Curvature of the wood in
all directions max. 10 mm per meter length
Wood types soft or hard wood

System performance:
Feed speed, continuously adjustable up to max. 230 m/min.
Per cutting cycle 0.6 - 1 sec.
In order to obtain the practical performance per day, an effectiveness factor dependent
on the customer's production conditions must be taken into account.
Working height of inlet and saw 900 mm
(placed on customer's platform, saw requires concrete base)
Working height of sorting 2000 mm

Connection values:
Total electrical connection value approx. 18 kW
Operating voltage 380 volts / 50 Hz
Voltage fluctuations max. 5%
Air consumption approx. 1200 NL/min.
Operating pressure approx. 8 bar
Suction speed approx. 30 m/sec.
Basic color pebble gray RAL 7032 and blue NCS 5030-R 80 B