Dima HP 100

Pick and Place
Versatile, Accurate, Fast, Efficient

Tact Time
1.16 sec/QFP with Area CCD Camera
0.85 sec/chip with Close Loop Electromechanical Alignment

Optimal Placement rate
3125 on IPC 9850 using Area SCC & LCC Camera’s
4200 on IPC 9850 using CLEA

Nominal Placement rate 2500 – 3500 cph

Applicable components 0201 - Chip, Melf, SOT, SOIC, TSOP, TNT, PLCC,
QFP, BGA, µBGA, LCC Field of view 42 x 42mm mm (1,65”)
Fine pitch down to 0,4mm (16 mil)
Tool exchange station 12 nozzle positions
Number of heads Single gantry with two independently controlled pipettes.

Mounting accuracy (X,Y) 3σ
50µ with Area CCD Camera
100µ on Close Loop Electromechanical Alignment

Maximum number of intelligent feeders
Tape feeders:
8/12mm 132 positions,
16mm 66 positions
24mm 66 positions
32mm 44 positions
44mm 33 positions
Vibratory feeders : SO8 to 16 198 positions

PCB Dimensions (X,Y)
Min: 30 x 30mm
Max: 330 x 450mm

PCB Positioning
Fiducial recognition through ESI Correctplace® Teach-in of holes or Odd shape lands is possible
PCB Loading & alignment time Approximately 2,8 seconds
Number of axis 2
Pick up error detection Through vacuum check or vision verification
Nozzle types 8 different shapes

Electric power
Voltage: 220- 240Vac
Frequency: 50 – 60Hz
Consumption: 2500 Watt

Air supply
Pressure: 6.5-7 Bar or 94-102 PSI
Quality: air that has been cool dried and filtered with a 3 µm filter
Connection: PU-6 air hose (outer diameter 8.3mm, internal diameter 5.9mm
Operating temperature 15 till 40 degrees Celsius
Humidity 20 till 90% no dew
Noise ≤ 70 dB(a)

Machine dimensions and weight
Length: 1700
Width: 1500
Height: 2200
Weight: 450 Kg without feeders
800 Kg with full feeder configuration