Dilo, Temafa, Trutzschler Nonwoven Line
EUROPE (Western and Northern)
Working width 5 m, currently being used in the production of: Automotive Nonwoven Velour Fabrics
Fibre Blending
TEMAFA 25m Conveyor (fits 8 bales end to end)
TEMAFA Single pin sheet blending hopper with Volumetric feed
TEMAFA FEARNAUGHT Fibre opening, Type RD02
Oiling
TEMAFA Metal detection
Fan
Feed to either:
- TEMAFA Mix master blending bin with conveyor floor (approx. 20m x 4m) Type MM20 / 2
Or
- TEMAFA Small Blending bin (5m x 5m)
Or
2 TEMAFA blending bins each approx. 2500 kg with single bin TEMAFA emptier
TEMAFA fabric condenser and feed tower (10m high)
TRUTZSCHLER FD-S fine fibre opening (2005)
Carding
TRUTZSCHLER volumetric card hopper feed
FOR multi-cylinder nonwoven card with double doffer, 2.5 m
Production rate up to 500 kg per hour
Cross lapper
AUTEFA Cross Lapper (Type 190 73) with 2.5m inlet and 5.0m max lay width (1999)
Needlepunch
Sound proof cabinet
DILO pre needle Type CBF T 50 (1999), width 5 m
(Input web compression sheets with finger system)
DILO Needle loom 1, width 5 m
Type DI-LOOM UD-Li S 50 (1999)
Stroke: Up
Twin Board
Total Needles 90000
Needle Density: 1800 needles /m
Max needled width: 5.0m
RPM: 1500 (Max)
DILO Needle loom 2, width 5 m
Type DI-LOOM UD-II i S 50 (1999)
Stroke: Down
Twin Board
Total Needles 90000
Needle Density: 1800 needles /m
Max needled width: 5.0m
RPM: 1500 (Max)
DILO Needle loom 3, width 5 m
Type DI-LOUR-II SXBG 50 (1999)
Stroke: Down
Twin Board
Total Needles 160000
Needle Density: 3200 needles /m
Fork needles
Brush conveyor
Max needled width: 5.0m
RPM: 1900 (Max)
Finishing
MENZEL J Box
MENZEL Overhead gantry
MENZEL metal detection, 5m
SELLERS cropping/shearing, 5m + 12 bag fibre/lint collection (2008) (little use)
4 head edge and centre fabric slitting
Edge trim - HEPP-SCHWAMBORN (Germany) – Edge shredding with fan
ETF cross cutting
ETF batching roll wind-up (2006)
Fabric measure
ETF cross cutting
ETF take-off rolls
6 Fabric roll transport trucks