Dentsply, Sirona CEREC SpeedFire Furnace

CEREC SpeedFire is the smallest and
fastest sintering furnace on the market and
can typically sinter a crown in approximately 14 minutes1.
The advantages of full-contour zirconia can
thus also be used for chairside treatment.
CEREC SpeedFire can process the
Dentsply Sirona ceramic block materials as well as
partner materials from Ivoclar, VITA Zahnfabrik, 3M Dental,
Kuraray Noritake Dental, GC and Shofu.

Dentsply Sirona Cerec Speedfire Furnace is a
temperature furnace to be utilised in offices.
The sintering of zirconium oxide and the shooting of
dental ceramics could be done in 1 furnace for the first time,
by employing innovative technologies.
Heating prices are allowed by induction technology.
This permits the sintering of zirconium oxide to
be carried out in under 15 minutes.
Dentists can provide restorations made of
the substance in one treatment session to the very first time.
The small and sleek design is for sintering furnaces exceptional.
An user interaction complements it.

SpeedFire Features
-LED Status Indication
Different colors indicate current status of process
-Induction Technology
Extremely fast heating cycles
-Touch-Display
Intuitive operation
-Intelligent Connectivity
The CEREC software sends an order with all necessary information to the furnace
-SuperSpeed Chamber
Carries up to 3 single crowns or one 3-unit bridge
(max. length of 31 mm sintered)

The smallest, fastest sintering furnace on the market,
the CEREC SpeedFire uses induction technology to
sinter and fire a dental crown in about 14 minutes*.
Once you design and mill your restorations as usual,
CEREC software automatically sends the order with
all necessary information to the furnace for sintering.
It’s that quick and easy to create a patient-pleasing restoration
with incredibly natural-looking esthetics.

Accommodating. The SuperSpeed chamber can accommodate
up to three single dental crowns or one three-unit dental bridge
(maximum length of 31mm sintered)
Versatile. In addition to Dentsply Sirona
ceramic block materials, the CEREC SpeedFire can
process validated partner materials from Ivoclar,
VITA Zahnfabrik, 3M Dental, Kuraray Noritake Dental,
GC and Shofu Intuitive.
The CEREC SpeedFire sintering furnace features a
touch display for easy, intuitive operation,
along with different colored LED signals that
indicate current status
Timesaving. By firing up the preheating function during the
grinding process, you save time and speed up the glazing step

Technical Data
Speed sintering of full-contour zirconium dioxide in one session
Pre-drying program
– Even wet-milled Zirconia restorations can be processed in one session
Maximum Sintering Temperature: 1600°C
Speed Glaze Process
– Fastest Glazing process in less than 9 minutes
High heating rates (max. 300 °C/min)
– No pre-heating required
– No holding temperatures needed
Short cooling down phase
Perfect homogeneous temperature distribution
– Less waiting times until restoration can be finalized thanks to
active cooling system
Connectivity: 2x USB 2,0, lx LAN (RJ45),
WLAN (optional via WLANUSB Dongle)