Davis Standard DSPW 75IN25

75mm (2.95″) 32:1 L/single screw extruder.
Barrel is six (6) zone electrically heated,
water cooled(closed loop), and non-vented barrel at
a 48″ center-line height.
Gearbox has a reduction ratio of 17:26, is rated at 75 HP at
a service factor of 1.25, and is set up for
a maximum screw speed of 100 RPM.
Gearbox is belt driven by 75 HP Reliance D/C motor.
Unitized temperature control panel is empty.
Extruder, panel, and drive are mounted on a steel plate.
Water cooled feed throat with a 4 x 4″ on center entrance.
Bunting magnet mounted on feed throat.
Dynisco model EH-35 screen changer is mounted on discharge.
Screen changer S/N EH35-298.
Manufactured 10/2001.
460/3/60. No controls.