Cursal TRSI 7000 AP

Cutting line
Condition: used

Technical characteristics:
Group of 6 chains, pitch 5/8" motorized for loading and bringing together the guide of individual or bundled edged boards.
Capacity each 65 kg per ml.
Pneumatic lifting.
HP 0.75 motor.
Device for singling out boards / bundles to be cut by means of pneumatic lifting arms.
Electric stop barrier.
Dimensions: Distance between chains var. mm, Chain length 1300 mm, No. 6 chains.
Numerically controlled pusher with programmed stroke for sequential fixed cuts for edged boards (maximum weight 70 (100) kg).
Monobloc structure with welded steel frame and worked, prepared for the assembly of all the devices written below.
CNC computer with touch screen with the possibility of managing several folders with 15 cutting programs for each.
Programmable work stop: when the total number of programmed cycles is reached,
when the quantities of each length or all quantities are completed.
Detection of daily productivity, automatic recording in Excel compatible format, at the end of the order.
Possibility of remotely loading / downloading cutting programs with Ethernet port and USB key.
USB - Ethernet - RS 232/485 serial connection for remote connections with computer and printer.
Programmable pusher speed from 10 to 200 m/minute with Brushless servomotor.
Recirculating ball slide with lubrication system.
Board feed from right to left.
Positioning accuracy up to 1 meter ± 0.25 mm, in addition to 1 meter ± 0.25 mm/m.
Pusher with pneumatic lift: stroke 150 mm (only on TRSI AP / fixed on TRSI base.
The boards must be straight and with constant widths.
Length of the boards to be cut at the inlet min. 500 - max. 5150 mm.
Cutting height on the guide 120 mm.
Board width min. 35 - max. 250 (300) mm.
Automatic cutting control given by the computer.
Vertical alternating blade movement, with fully controlled stroke.
7.5 HP blade motor (opt. 10) and automatic braking.
Adjustable cutting time from 0.3 to 2 seconds.
Pneumatic device for aligning the guide mounted in charge before the blade.
Pneumatic blade press with mobile housing. Stroke 150 mm.
Horizontal axle braking wheels, installed after the blade (with clutch) with vertical pneumatic movement.
Plans preload.
Total protection.
Infrared safety barrier on the loading side protected against the impact of the boards.
Worktop height 900 ± 20 mm (this height is valid for the entire line even if loading and unloading indicate other dimensions).
Dimensions: length 7900 mm - depth 1180 mm (1770 mm with CALS chain feeder) - height clearance 1480 mm.

Option included:
Unloading table: Structure in thick steel profile without welds to prevent waste from catching.
Dimensions: length 4000 mm - depth 400 mm.