CMS PF102

CNC work center CMS production machine with large capacity. 6 electrospindles,
double vacuum tables that can be run in synchronization with each other for larger workpieces or individually alternately.
9 cutters and tools included, complete manual, instruction book.

Technology data:
Numerical control (NC) type AB OSAI 10/310
Memory 32 Mbyte on HD
Double vacuum table 1500x1500mm
Can be run alternately or synchronized together under NC control for larger workpieces.
Type: Lignostone suction surface.
Width after X 1500mm, after Y 1500mm.
2 vacuum pumps type BECKER VTL F250, 2x4.8Kw, 250m3/h
Stroke shafts:
X=3600mm
Y=1600mm
Z=250mm
Feed rate programmable:
X=900mm/s /54000mm/min)
Y=750mm/s (45000mm/min)
Z=167mm/s (10000mm/min)

6 milling motors type T12/18, 4-pole electrospindle, rated 8.5kw/spindle
frequency 600Hz, max 18000v/min, current 22 A, IP54
Chuck ETS 40 collets (max attachment diameter 25mm)
Hollow cutters hole diam 30mm
MK2 morse cone with hydraulic grip
Tool max length 120mm
Frequency converter 3 pcs type BERGES ACI 22, 3x22kw
Programmable electrospindle speed from 0-18000 rpm
Power 400 volts AC 10% V, 50 Hz, max installed 100KV A
Static converter power 3x22 kw
Average absorbed operating power 33 kw
Max current at start up 150A
Power cable three phase 4x16mm2
Cable terminal
Electrical cabinet dimension 1000x800x2100mm(h)
Chipboards 6 pcs á 140 mm in diam, 2 pcs á 250 mm in diam.
Weight approx. 7000 Kg
Installation surface see drawings