Clausing Colchester ENGINE LATHE 1600 RPM 17"
AMERICA North (USA-Canada-Mexico)
17" X 60" CLAUSING COLCHESTER ENGINE LATHE
Machine Model No.: 17"
Swing Over Bed: 17-1/4"
Swing Over Cross Slide: 10-1/2"
Distance Between Centers: 60"
Hole Thru Spindle: 3-1/16"
Spindle Nose: D1-8 Camlock
(16) Spindle Speeds: 20 to 1600 RPM
(38) Standard Threads: 2 to 72 TPI
(40) Metric Threads: .4 to 14 MM
Longitudinal Feeds: .002" to .032" Per Rev.
Cross Feeds: .001" to .016" Per Rev.
Tailstock Diameter: 2-15/16"
Tailstock Taper: #5 Morse
Tailstock Spindle Travel: 5-1/2"
EQUIPPED WITH:
12" 6-Jaw Buck Chuck
Trak 102 2-Axis DRO
Aloris Tool Post
Work Light
3/8" to 1" Key Type Drill Chuck with #5 Morse Taper
Inch Graduated Dial on Cross Slide, Top Compound and Tailstock
Hard Bedways in Good Condition
On-Off Levers at Headstock and Carriage Positions
End Quadrant Gear Set with Assorted Gears
Coolant Pan with Pump and Piping
Full Length Rear Splash Guard
10 HP Main Motor, Wired for 3 Phase, 60 Cycle, 230/460 Volts
Presently Wired for 440 Volt Operation
Overall Size: 120" LR x 48" FB x 67" High