Cincinnati 14 x 48 Universal

14" X 48" CINCINNATI UNIVERSAL CYLINDRICAL GRINDER
14 x 48 Universal
New Date: 1980


Capacity: 14" x 48"
Maximum Swing Over Table: 14-15/16"
Maximum Dia. Machine Will Grind with Full Size Wheel: 14-15/16"
Minimum Dia. Machine Will Grind with Either Full Size or Worn Out Wheel: 0
Nominal Distance Between Centers: 48"
Distance from Floor to Centers: 42-3/8"
Swivel Table Graduated to an Angle:
Toward Wheelhead: 9°
Away from Wheelhead: 2°
Swivel Table Graduated to Taper Per Foot:
Toward Wheelhead: 3-3/4"
Away from Wheelhead: 1-1/4"
Floor Space Required: 72-3/4" x 185"
Approx. Net Weight with All Motors: 9,900 Lbs.

GRINDING WHEELHEAD
Swivel Range:
Lower Swivel, Right and Left: 90°
Upper Swivel, Right and Left: 30°
Grinding Wheels Regularly Supplied (Dia. x Face x Hole):
14" x 1-1/2" x 5"
14" x 1" x 5"

CROSS FEED:
Automatic Infeed at Table Reversal (Dia. Reduction:
Low: .0002" to .005", High: .0005" to .0125"
Pick Feed Selections:
Right End Only, Left End Only: Yes
Right and Left Ends: Yes
Wheelhead Movement Per Turn of Crossfeed Handwheel:
Low: .050", High: .250"
Minimum Infeed Increment in Terms of Dia. Reduction: .000050"

HEADSTOCK AND FOOTSTOCK:
Taper Hole in Headstock and Footstock Spindles: No. 9 B & S
Number of Work Rotation Speeds: Infinite
Range of Work Rotation Speeds: 50 to 500 RPM
(Footstock Center Retraction by Hand Lever)
Headstock Spindle Nose, American Lathe Standard: 5"
Headstock Swivel:
Toward Wheelhead: 90°
Away from Wheelhead: 30°

TABLE TRAVERSE:
Number of Traverse Speeds: Infinite
Range of Table Traverse Speeds: 3 to 220 IPM
Minimum Movement Required to Reverse Table: 3/32"
Accuracy of Table Reversal at All Traverse Rates: .004"
Independent Right-Hand and Left-Hand Tarry Adjustment, Seconds: 0 to 5
Mechanical Hand Table Traverse per Revolution of Handwheel:
Rapid: 15/16", Slow: 0.2"

POWER REQUIREMENTS (ELECTRICAL EQUIPMENT INCLUDED WITH MACHINE):
Wheelhead Motor: 3 HP
Hydraulic Pump Motor: 1 HP
Headstock Motor: 1 HP
Internal Grinding Attachment Motor: 1 HP
Cutting Fluid Pump Motor: 1/4 HP
Wired for 3 Phase, 60 Cycle, 220 Volts

EQUIPPED WITH:
Swing Down Internal Grinding with Cartridge Type Spindle
Single Axis Digital Read Out Scale for Infeed on Grinding Head
Left and Right Table Tarry
(3) Steady Rests

DIMENSIONS:
Machine: 168" LR x 80" FB x 72" High
Control Cabinet: 40" LR x 16" FB x 70" High