Chilli Max 50, LIQUID HEATER & COOLER

Length: 750
Width: 880
Height: 1000
Motor: 3ph

APPLICATIONS
·Cooling and heating of must, wine, beer and other liquids such as cider, carbonated soft-drinks, distillates etc.
·Fermentation temperature control
·Tartaric stabilisation of wines and biological reduction of acids
·Cool storage of wine until bottling
·Maturation of young beer
·Cooling and stabilisation of distillates
·Room tempering of halls and storage rooms - only possible with additional fan coils

WATER TEMPERATURE RANGE from -10°C to +40°C
AMBIENT TEMPERATURE RANGE from +10°C to +42°C

CHARACTERISTICS
·Hermetically closed motor compressor (Scroll)
·Cooling water circuit containing stainless steel water tank and centrifugal pump
·Integrated electric heating rod (3kW)
·Pressure switch integrated in the cooling circuit for pump control - pump protection and energy-saving
·Integrated level-switch and integrated by-pass for the pump
·Highly efficient micro-channel condenser that ensures optimal heat-transfer
·All water parts in the unit are isolated
·Stainless steel frame with painted front board ·Units are mobile on wheels
·Side boards are easy to remove, interchangeable between them
·Ventilator on the top part, air-blow direction upwards
·Refrigerant R410A
·Protection type of the chiller is IP54 minimum
·Water inlet/outlet connection 3/4” (female)
·It is required to add Glycol (30-35%) to the cooling water by outlet temperatures below +7°C.
·Cooling capacity 6.4 kW (at an ambient temperature of +32°C and a water temperature of +15°C)
·Electrical supply 400V / 3Ph / 50Hz
·Max absorbed power A 4,2
·Max current consumption 7,8kW
·Noise level dB (A) 73* at a distance of 1m
·Tank volume 30L
·Type of pump Grundfos CM 3-4
·Pump flow rate 2.5m³ per hour @ 3 bar
·Weight 131 kg