Casadei MATRIX 4+1

4-SIDED PLASTER MOULDER, 4 TOOL HOLDERS + UNIVERSAL SHAFT 2.50M TABLE & REINFORCED MOTORS
MAKING CAPACITIES (thickness x width): 6 to 155 X 25 to 230 mm
- 4-sided planer and moulder
- Working width: 25 to 230 mm
- Working height (wood thickness): 6 to 155 mm
- Maximum section of finished wood: 155 x 230 mm
- Minimum working length: 480 mm
- Adjustable pass grip: max 10 mm
- Shaft rotation speed: 6000 t/min

COMPOSITION OF THE PLANING MACHINE:
- Robust welded mechanical frame
- Soundproofing and panoramic cover on gas cylinders
- Raised control panel, operator face
- Steel infeed table 2500 x 250 mm
Height from the ground: 880 mm
Lateral infeed spring pusher
Manual table lubrication unit located after planing
1) Lower horizontal shaft 5.5 kW
TERSA tool holder Ø 125 x h.240 mm
1 retractable vertical roller presser
2 & 3) Right then left vertical shafts 1 x 7.5 kW
TERSA tool holder Ø 125 x h.165 mm
4) Upper horizontal shaft 7.5 kW
TERSA tool holder Ø 125 x h.240 mm
- Adjustable pressure shoe at the outlet
5) Universal shaft 7.5 kW Ø 40 x 255 mm
1 retractable horizontal roller press

DRIVE:
- Feed with variator: 5 to 25 m/min
Drive motor: 1.1 kW (1.5 hp)
- 8 independent feed rollers with pneumatic pressure:
2+2 grooved steel then 2+2 rubber coated

OTHER CHARACTERISTICS:
- CE marking
- General power supply: 380 v. Three-phase 50 Hz
- Padlockable switch, automatic star-delta starts Front/rear punch stops
- Installed power: 37 kW (50 hp) IN 62A
- Brake motors
- Shaft drive by cardan shafts
- Digital indicators (Siko type counters) for precise manual adjustment of each operation
- Electric raising and lowering of the beam for thickness adjustment, Raising/lowering motor: 0.37 kW
- Axial adjustment of the shafts:
Lower horizontal from 0 to 15 mm
Upper horizontal from 0 to 25 mm
Vertical: 0 to 25 mm

- Acceptable tool dimensions:
On lower horizontal shaft: Ø 120 to 140 mm
To be profiled on vertical shafts: Ø 100 to 180 mm
To be profiled on upper horizontal shaft: Ø 100 to 180 mm
End mill for surfacing: Ø140x12x40 mm
- Recommended pneumatic supply: 7 bars
Working pressure: 6 bar
Average consumption: 0.85 Nl/cycle
Connection: 1/2" G
- Suction, upper centralized nozzle: Ø 250 mm
Required air speed: 25 m/sec minimum Flow rate: 4500 m3/h
- Technical manual included.
- Machine equipped with 4 TERSA shafts
Dimensions: 4700 x 1700 x h.1800 mm
Weight: 2240 kg