Casadei E550 PMCR

Used Edgebander
Min/Max panel height 8mm - 50mm
Panel feed speed 9m / min
Coil edge thickness 0.4-3mm
Max edge in precut strips 0.4-5mm
Min Panel width 95mm
Minimum Panel length 110mm
Glue pot heating element 1315w - 6 cartridges
Premilling Unit 2 x 200 Hz- 12000 rpm - 0.75 kW
End Trimming motor 200 Hz- 12000 rpm - 0.22 kW
Flush trimming motor (each) 200 Hz- 12000 rpm - 0.37 kW
Cutterblocks with combined
WIDIA disposable knives (rad/bev) D=75mm Z4 d=16mm (r=2-3mm)
Total installed power 5kw approx.
Weight 525kg Approx.
Dimensions L= 363cm x D= 155cm
Extraction outlets: 1 x 120mm (820m3h) & 2 x 80mm (730m3h)
recommended grease for gluepot: RHARDGC300 Arexons GC300
machine includes the following options

LORIEI
Cleaning spay agent unit
Combined with the buffing unit, it improves panel
cleanliness and edge polishing, making the surface more homogeneous.
The spray function is controlled by the PLC.
Complete with 2 sprayers (lower and upper) and an liquid tank.
NB: Available only in combination with the Buffing unit.

LOLAMP
Infrared lamp for panel preheating after pre-milling.
Recommended to optimize edge glueing to panel by preheating panels before the glueing phase.
Particularly suitable in areas with a cold climate and for facilities storing panels in cold locations.

LORASB
Edge Scraping unit
R=2 mm (R=1 mm and R=3 mm upon request) for a perfect edge finishing.
Eliminates notches left by flush trimmer unit tools.
Complete with vertical copier disc and front pad copier for adjustment of tool operating position.

LOASTR
Dust extraction system for Edge Scraping
Transparent box which divides and collects shavings Useful to separate and collect the particular edge scraping shavings which could
affect the efficiency of the dust extraction system to which the machine is connected.

LOSPA3
Buffing Unit
Fitted with 2 independent motors (0.13 kW at
1.400 rpm) to guarantee perfect finishing of ABS and PVC edges.

LORSCL
Glue scraper unit
Recommended for the removal of any excess glue in the area of the joint between the panel and the edge

LORIER
Anti-Adherence release agent spraying unit
Prevents any excess glue from adhering to the upper and lower panel surfaces, also facilitating and improving cleaning in the glueing line area.
The spray function is controlled by the PLC.
Complete with 2 sprayers (lower and upper) and a liquid tank.
NB: Available only in combination with the pre-milling unit (E 550 PM and E 550 PMCR)

LONEST
Vertical copier "Nesting" for Flush Trimming unit
The bottom copier is fitted with n. 3 bearings which guarantee n. 3 support points.
Suitable when processing panels with cavities to hold hardware.