Carl Zeiss Cirrus OCT 5000

Carl Zeiss Cirrus OCT 5000 Visualization at the speed of CIRRUS

Analyzing a single pathology from multiple views
provides comprehensive insight and analysis of
the clinical situation. How this helps you:

Spot small areas of pathology. Tightly spaced B-scans,
(either 30 or 47 μm apart), in the cube ensure that small areas
of pathology are imaged. For reference, a human hair is
about 40-120 μm in diameter.

Visualize the fovea. Scans that are spaced further apart than in
the CIRRUS cube may miss the central fovea.

Fuel for analysis. Millions of data points from
the cube are fed into the Zeiss proprietary algorithms for
accurate segmentation, reproducible measurements and
registration for change analysis.

Take the pressure off the operator. As long as the scan is
placed in the vicinity of the fovea or optic nerve,
the software automatically centers the measurements after
the capture.

See the tissue from different perspectives.
View the cube data from all angles, with 3D rendering,
OCT fundus images and Advanced Visualization

Future ready. Previously captured CIRRUS cubes can be analyzed using new analyses.

Carl Zeiss Cirrus OCT 5000 Tracking at the speed

FastTrac reduces eye motion artifacts without
sacrificing patient throughput with a
proprietary scan acquisition strategy,
high speed 20 Hz LSO camera,
and single-pass alignment scanning.
With FastTrac, scan at the highest resolution at
the same location at each visit.

Assessment at the speed of CIRRUS

Measurement centering with FoveaFinder and AutoCenter

On the macula, the unique FoveaFinder technology ensures the
ETDRS and ganglion cell plus inner plexiform layer
measurement frameworks are centered on the fovea.

Carl Zeiss Cirrus OCT 5000 AutoCenter function automatically
centers the 3.4 mm diameter peripapillary RNFL calculation
circle around the disc for precise placement and
repeatable registration.
The placement of the circle is not operator dependent. Accuracy, registration and reproducibility are assured.

Network Switches
Interface speed: 10/100/1000 Mb/s
Interface connectors: RJ-45
Cable detection: MDI/MDI-X (automatic straight-through or
crossover cable detection)
Supported standards: IEEE 802.3, 802.3u, 802.3ab, and 802.3x

Carl Zeiss Cirrus OCT 5000 Restrictions:
Device must be CD-Marked for use in EU
Device must have Nationally Recognized Testing Laboratory (NRTL) and FCC approval for use in the US.
Device must be powered by USB port only.
Device must be outside the patient environment (at least 1.5 meters away), unless used with an isolation transformer.
Do not use with an extension cord or power strip.
Use unshielded network cables (UTP) only.
Do not share the same wall outlet with the CIRRUS HD-OCT.