Burkle FFAII 1300

Thermal laminating system
Working width: 1300 mm

Plate dimensions
Width: 200 - 1300 mm
Length: 400 - 3000 mm
Thickness: 8 - 40 +/- 0.2mm

Foil dimensions
Width max. 1320 mm (lateral projection up to 20mm)
Roll diameter 76 or 152 mm (3" or 6")

Working height above floor: 940 mm
System speed: 15 - 45 m/min
Three-phase drive with vector control
Operating side: right
Plate passage: centric

System structure FFAII 1300
- Brush machine DBM (warp brushes)
- Preheating and smoothing calender GKL, D = 500 mm
- Thermal oil heater 36 kW
- Hardener application machine DAH + complete hardener circulation system with monitoring
- Transport route + IR zones with temperature sensors
- Glue application machine DAK + automatic. Level scanning
- Cooling device for DOW cooling
- Glue supply
- Cone transport route TKE
- Laminating calender EKM, D = 500 mm + film unwinding station + separating station + tape transport route with operating bridge for FVE
- tension shafts
- Smoothing calender GKL, D = 500 mm at the entrance of the conveyor belt
- Thermal oil heater 96 kW for laminating calenders and smoothing calenders
- Central cabinet
- I.S.E. Optimat ISL 111 (built in 2004)
- Bargstedt stacking