Brandt, Ligmatech Ambition KDF 1870 Profiline w/ ZHR-01

Edgebander w/ Return Conveyor
Edge band thickness - 0.4 – 20 mm (0.016" - 3/4" )
Coil cutoff maximum - 0.8 x 60 mm, 3.0 x 45 mm (PVC), 3.0 x 33 mm (Wood coils)
Edge band height - 12 - 65 mm (1/2" – 2 9/16 ")
Panel length min. - 160 mm (6 3/8")
Panel width min. - 70 mm (2 3/4")
Panel thickness - (min/max.) - 8 mm/60 mm (5/16" / 2-3/8")
Feed speed - 8 m/min (26 FPM) to 20 m/min (65 FPM ); 16 m/min (52 FPM)
when edge thickness exceeds 3 mm. 14 m/min ( 46 FPM ) when corner rounding.
Feed motor - 2.2 kw (3 HP)
Joint trimming unit – two motors - 2.2 kw ( 3 HP each )
Cutting speed - 12,000 RPM
Pressure section - First roller driven, 4 idle rollers
End trim unit - two motors - .80 kw (1 HP ea)
Cutting speed - 12,000 RPM
Straight cut max. - 20 x 45 mm (3/4" x 1 3/4")
Flush / Fine trimming unit - 1.85 kw ( 2.5 HP ) each
Cutter speed - 12,000 RPM
Tilt range - 0 – 25 degrees
Fine trimming unit-auto tilt - .55 kw (3/4 HP each)
Cutter speed - 12,000 RPM
Multi Function trimming unit - top and bottom - 0.4 kw (1/2 HP ea - two motors)
Ligmatech ZHR-01 Return Conveyor
Length - 300-2500mm (11-3/4" - 98-3/8")
Width - 50-1450mm ( 2" - 57")
Thickness - 8-60mm ( 5/16" - 2-3/8")
Feed Speed - 8-40m/min (26-131 FPM)