Brandt, Ligmatech Ambition 1660 FGC With ZHR05/R/065

Single-sided KAM with return system with return system
Machine equipment
- Joining unit 2 x 2.2 KW 200Hz
- Gluing unit A12
- Snipping unit chamfer/straight 2 x 0.35 KW
- Trimming unit 2 x 0.55 KW counter rotation
- Grooving unit 1 x 1.85 KW Swiveling
- Shaping trimming unit 2 x 0.35 KW WD 60
- Profile scraper blades with quick-change heads
- Free space glue joint scraper
- Buffing unit

Technical data:
- Feed rate 8 - 18 m/min
- Max. feed rate with profile router 11 m/min
- Max. feed rate with profile cutter
in conjunction with VKNR 4839 14 m/min
- Working height 950 mm
- Pneumatic connection min. 6 bar
- Total length 6,260 mm

- Workpiece width min:
- For workpiece thickness 12-22 mm / 70 mm*
- For workpiece thickness 23-40mm / 120 mm*
- For workpiece thickness 41-60mm / 150 mm*
*Depending on the workpiece length

- Workpiece protrusion 38 mm
- Workpiece thickness 8 - 60 mm
- Max. edge height = workpiece height + 6 mm
- Edge material roll 0.4 - 3 mm
- Edge cross-section max.
- For PVC 135 mm²
- For veneer 100 mm²
- Max. roll diameter 830 mm
- Edge material strip 0.4 - 12 mm
- Edge cross-section max.
- For strips 600 mm²

- If no radius is specified, R=2 mm retracted and delivered

Design of the return system
- Air table: 2500 mm long, 1000 mm wide, inclined by approx. 60 mm
- Conveyor belt: W=900 mm
- non-driven roller conveyor: L=2000 mm, W=900 mm
- Protrusion: approx. 250 (0; 500) mm

Technical data of the return system
Workpiece parameters:
- Length: 300 - 2500 mm
- Width: 60 - 800 mm resp.
- Length: 300 - 800 mm
- Width: >800 - 2000 mm
- Thickness: 8 - 60 mm

- The length is always the extension of the part in the transport direction of the base machine.
- The width is always the extension of the part transverse to the transport direction of the base machine.

- Weight: max. 50 kg
- Operating pressure: 6 bar
- Air consumption: 50 Nl/min